SQB/P Sectioning Sawing Machine, Beam Chain Saw Machine

SQB/P Sectioning Sawing Machine

The chain mode sectioning sawing machine SQB/P is a hydraulic machine consisting of a portal that runs on tracks with a horizontal arm capable of vertical cuts for the squaring off and blocking of hard and/or abrasive stones. The cuts are programmable by means of a computerised system loaded with positioning and cutting parameters.

Once the cutting sequence has been programmed, the machine can operate in an automatic cycle, even during night-time hours, without requiring any operator interventions.

Fantini cutting machines can be customised using high automation systems depending on customer requirements.

Technical Specifications

Power installed: 50 kW

Max. cutting width (L): 3,500/4,000 mm

Max. cutting height (H): 2,500 mm

Variable chain speed: 0-2 metres/ sec

Variable arm descent: 0-15 cm/min

Width of cut: 27 mm – 38 mm

Machine travelling speed on tracks: 3-30 metres/min

Weight: 14,000 Kg

Technical characteristics may be subject to variations

Parameters	Unit	SQB-P-4000
Hydraulic pump flow during cutting	l/min	3.5
Hydraulic pump flow for chain movement	l/min	0-118
Total distance moved	mt	47.250
Gantry translational movement motor	kW	1.1
Cutting Width	mm	38
Weight	Kg	14000
Auxiliary power supply	Volts	230
Variable chain speed	mt/sec	0-0.7
Cable winder motor	kW	0.55
Gantry translational movement speed	cm/min	max 270
Dust conveyor belt motor	kW	0.25
Control circuit voltage	Volts	24
Variable arm descent	cm/min	0-15
Max. cutting height (H)	mm	2500
Total Power installed	kW	65
Machine travelling speed on tracks	mt/min	3-30
Lubrication control unit storage tank capacity	cm3	18
Vertical speed of arm during cutting	cm/min	25-160
Max. cutting width (L)	mm	3500/4000
Lubrication control unit motor	kW	0.18
Hydraulic fluid storage tank capacity	litre	300
Inverter on gantry motor	kW	4
Vertical speed of arm during high-speed movements	cm/min	max 150
Chain advance electrical motor	kW	45
Main power supply	Volts	500
Hydraulic pump flow for high-speed movements	l/min	33
Dimension LxWxH	mt	7670x5000x6040
Hydraulic control unit motor	kW	11