SQB/P/E Beam Chain Saw Machine

The chain mode sectioning sawing machine SQB/P is a hydraulic machine consisting of a portal that runs on tracks, and a horizontal arm that can make vertical cuts for squaring off and blocking hard and/or abrasive stones. The cuts can be programmed by means of a computerised system loaded with positioning and cutting parameters.

Once the cutting sequence has been programmed, the machine can operate in an automatic cycle, even during night-time hours, without the need for interventions by an operator.

Fantini cutting machines can be customised with high automation systems, according to customer requirements.

Technical Specifications

Power installed: 50 kW

Max. cutting width (L): 3,500/4,000 mm

Max. cutting height (H): 2,500 mm

Variable chain speed: 0-2 metres/ sec

Variable arm descent: 0-15 cm/min

Width of cut: 27 mm – 38 mm

Machine travelling speed on tracks: 3-30 metres/min

Weight: 14,000 Kg

Technical characteristics may be subject to variations

Parameters	Unit	SQB/P/E
Max. cutting width (L)	mm	3500/4000
Auxiliary power supply	Volts	230
Hydraulic pump flow for chain movement	l/min	0-118
Dimension LxWxH	mt	7670x5000x6040
Control circuit voltage	Volts	24
Inverter on gantry motor	kW	4
Main power supply	Volts	500
Vertical speed of arm during cutting	cm/min	25-160
Vertical speed of arm during high-speed movements	cm/min	max 150
Hydraulic pump flow during cutting	l/min	3.5
Hydraulic control unit motor	kW	11
Variable chain speed	mt/sec	0-0.7
Cable winder motor	kW	0.55
Hydraulic pump flow for high-speed movements	l/min	33
Total distance moved	mt	47,250
Dust conveyor belt motor	kW	0.25
Lubrication control unit motor	kW	0.18
Max. cutting height (H)	mm	2500
Machine travelling speed on tracks	mt/min	3-30
Hydraulic fluid storage tank capacity	litre	300
Gantry translational movement speed	cm/min	max 270
Total Power installed	kW	65
Lubrication control unit storage tank capacity	cm3	18
Chain advance electrical motor	kW	45
Gantry translational movement motor	kW	1.1
Weight	Kg	14000
Variable arm descent	cm/min	0-15
Cutting Width	mm	27 to 38