Anchor Hole Machine For Undercut Bolt In Stone Cladding System

Handheld Drill Machine to drill Anchor Hole for undercut anchors in stone cladding system

Main application: This machine is suitable for drilling holes for undercut anchors on marble, granite, ceramic board, honeycomb board, high-density cement board, and various man-made fiber boards. All dry hanging undercut anchor holes processing. 
This equipment has reasonable structure design, small size, light weight, quick and light operation, adopts one-way 220V voltage, low power consumption, energy saving and environmental protection, and has two operation modes: fixed and mobile. It is especially suitable for the needs of small and medium-sized curtain wall back bolts and project finishing. 

Equipment Technical Parameters:
Maximum package size: 550*350*250 (mm)
Maximum vertical size: unlimited
Aperture: M7.2, M9, M11, M13
Undercut anchor hole drilling depth: 5-20mm (if the drilling depth is greater than 20, an extended drill bit needs to be customized)
Voltage: AC 220V
Rotating speed: 11000r/min (using the domestic first brushless angle grinder without carbon brush replacement for life)
Machine power: 1350W
Air pressure: power of the connected air pump is 2KW or above
Water pressure: power of the self-priming pump is 550W or 750W, and the head is more than 30 meters
Machine weight: 10KG

Parameters	Unit	VTDM-P02
Drill rod length	mm	50
Overall width	mm	250
Overall length	mm	550
Max. drill rod diameter	mm	13
Max. sound	dB	60
Frequency	Hz	50
Min. drill rod diameter	mm	7
Rotating speed/Drilling speed	r/min	1100
Processing type(Dry or Wet)		Wet
Output power	w	1350
Max. drilling depth	mm	20
Overall height	mm	350
Apr. weight	Kg	10
Power source		Electric Supply
Rated voltage	V	220

• 

  Different types of stone panels can be drilled

• 

  Anchor Hole in Stone

• 

• 

  Payment required

• 

  Payment required

• 

  Payment required

• 

  Sintering Drill Bit

  Need to be replaced