solid surface adhesive, quartz surface adheisve, solid surface glue, stone glue, artificial stone glue, stone adhesive
solid surface adhesive, quartz surface adheisve, solid surface glue, stone glue, artificial stone glue, stone adhesive
50ml Solid Surface Adhesive Glue Manufacturer For Kitchen Countertop Glue
Product Detail
Brand | Kongder |
Model NO. | KDR 0010 |
Application | solid surface,quartz surface,kitchen countertop,Pure Acrylic Board, composite acrylic board and unsaturated polyester board. |
Main Raw Material | methyl methacrylate, aluminum hydroxide |
Classification |
Double Components Adhesives |
Place of Origin | GuangDong, China |
CAS NO. |
80-62-6 |
Other name | MMA, acrylic adhesive, methyl methacrylate adhesive, SBS adhesive, two component adhesive |
Type |
Artificial Stone,Cartridge Gun |
Color | More that 500 colors is available, customized colors is ok. |
Certification | SGS, ROHS, SVHC, ISO9001 |
Technical Doc. | MSDS, TDS |
Warranty | 10 years non yellowing |
OEM | OEM is available |
Delivery time | in 3-5 days after you confirm the order |
Contact | Lisa@dgkongder.com |
Our Advantage
1.Own 90% Chinese market
2.High strength: better than Corian and LG, Quartz adhesive is better than Intergra
3.Non yellowing with 10 years warranty
4.Low temperature resistant: -50℃, High temperature resistant: 180℃
5.Curing time: 18-22minuts at 22℃
6.Shelf time: 24 months (10℃-18℃)
7.More than 500 colors, matched with Straon, Corian, Casestone, Silestone, Magicstone, etc
8.The only Chinese glue manufacturer can use MIXPAC cartridge with intellectual property protection
9.SGS,ROHS,SVHC,ISO9001 certificated
10. Free sample
Specification
Model |
50ml-SBS Acrylic Adhesive |
Specification |
50ml |
N.w |
52g |
G.w |
101g(1 cartridge glue + 2 mixer tips) |
Cartridge Material |
PBT |
Accessary material |
PA |
PCS/CTN |
100 |
Ctn Size |
53.5×27.5×19.5cm |
CBM of Ctn |
0.02868938m³ |
Weight of Ctn |
11.3kg |
PCS/Cbm |
3200 |
Ctn/Cbm |
32 |
Weight of 1Cbm |
361kg |
Applicator |
50ml Dispenser |
Detailed parameters
Ingredient |
Methyl methacrylate, Aluminum Hydroxide |
Application |
Artificial stone, Pure acrylic Solid surface, Modified acrylic Solid surface, Polyester, Composite board |
Working time (24℃/75.2℉) |
8-10minutes |
Fixture time (24℃/75.2℉) |
18-22 minutes |
Shelf Life (10/50℉-18℃/64.4℉) |
24months |
Viscosity CPS (24℃/75℉) |
A(18000-22000), B(4000-6000) |
Mix Ratio(Weight & Volume) |
A:B=10:1 |
Mixed Specific Gravity |
1.04 |
Color Matching Effect |
Seamless joint |
Extension meter of once dispense |
6-8m |
Operation Temperature |
24℃/75℉ above is suggested |
UV stability |
8 years non yellowing, data from Corian GW101 and Magicstone PM201 tested |
Bond strength |
Three -point anti-crack test: 35.8Mpa-43.08 Mpa, Cantilever beam test 3.28KJ/㎡ -3.73KJ/㎡ |
Flexibility(after joint) |
Free to bend any shape with a heat 150℃ to pure acrylic board and adhesive |
Temperature tolerance |
-55℃/-67℉-185℃/365℉ |
Qty for standard Acrylic sheet |
3sets(12×760×3680/3050mm),2-2.5sets(12×760×2440mm) |
Certificates |
SGS-ROHS, REACH, ISO9001, MSDS, TDS |
DIRECTION:
●Remove the cover and unplug, and clean up the blockage if there is any. Please make sure that glue A and glue B flow out at the same time before you put on the mixer. Only after the mixer is fixed well on the glue gun, then you can begin to apply the glue. Please ensure that the contact interface should be dry, clean without oil. In order to guarantee the good quality of the glue, please note: Do discard some glue in the quantity of the similar length to the mixer when change a new mixer and make sure to finish the joint within 3 minutes (use the fixture). Make grinding and polishing after 25 minutes when it is fixed(under the temperature of 22℃)
● Please change a new mixer when the pausing time is more than 5 minutes during the gluing.
●In case that the working temperature is 10℃ below, you can adopt the regional heating method (but the temperature should not be above 30℃ ). For example, use the coal to heating in the factory, or use the electric fan or sunlamp to heating at site (Should not be too near to the glue. The electric fan should be 1 meter far away while the sunlamp should be 3 meter far away at least).
●Wear protective glasses, mask and gloves while using glue, avoid inhaling vapor, Ensure that the workplace air circulation.
●See enclosed instruction for use and safety information.
CAUTION!!!
●keep in the cool, ventilated place and avoid UV.
●Keep away from heat, spark and open flame.
●Avoid directly contact with eyes and skin.
●please don't eat.
●Keep out of the reach of Children.
FIRST AID:
●In the case of contact of eyes immediately flush with plenty of water at least 15minutes. Wash thoroughly with soap and water after handling. If inhaled, move suffered one to a place with fresh air , in case swallowed, induce vomiting, and call a physician immediately.