Slate Landscaping Pavements, Grey Slate Pavements

Mark the area to be tileable with drawstrings, color, etc.
Dig away the soil and clay to a depth of 30 cm.
Place markv?v (geotextile) which prevents the soil from penetrating into the bearing.
Add about 20 cm base course, use crushed 0-16 mm.
Compact base course with rammer.
Add 5 cm means sand or stone dust.
Pull off the board, use a spirit level. Near the building there should be a case of 2 cm / m from the building.
Slate tiles can be tamed with a hammer, a chisel is a good tool for the job.
You can also cut the tiles with an angle grinder (use a diamond disc). It is to be removed are marked with a marking chalk.
Use rubber mallet to adjust the position of the plate, do not forget the spirit level.
Brush down fogsand (0-2mm) or stone dust between the plates and water, repeat a few times.
Sure, put the slate is.