Epoxy 4+1 Fluid Transparent Epoxy Adhesive Of Slow Hardening Time

TRANSPARENT EPOXY ADHESIVE OF SLOW HARDENING TIME for CONSOLIDATING and RESTRUCTURING MICROCRACKS and MICROSLITS

Two-component epoxy adhesive, transparent. Formulated for the consolidating and restructuring of micro-cracks of any type of marble, granite, natural and artificial stone, ceramics. His negligible shrinkage allows the repair of deep cracks. Formulation of slow hardening time for deeper penetration.

FIELD OF USE For all types of stone and ceramic materials, both natural and synthetic

PROPERTIES

- Excellent adhesion

- High transparency

- Weather and acid rain resistant

- Resistant to solvents, basic (therefore suitable to concrete) and acid environment

- Negligible yellowing

- High stability to UV rays

- Almost no shrinkage

- Practically odourless

- Also suitable for application of fiberglass net for reinforcing the materials.

WARNING

- Avoid the use at temperatures below 10°C/50°F

- It doesn’t adhere to silicon

- It doesn’t adhere to polyethylene

HOW TO USE PREPARING THE SURFACE.

Carefully clean the surfaces by removing any dust and loose parts, traces of cement, plaster, oil or fats, etc. Better adhesion if the support is slightly roughened..

PREPARING THE MIXTURE.

Mix thoroughly component A and component B exactly in the ratio indicated A:B=100:25 until the complete homogenization.

APPLICATION.

Apply the mixed product on the clean and dry surface with a spatula / putty knife. After 12 to 15 hours it’s possible the displacement of the piece and after 24-48 hours (depending on environment condition, temperature, humidity, etc.) you can proceed to subsequent processes.

IMPORTANT

- Do not use the mixture A + B if already in the process of gelation

- Do not return the unused product in the can/ container

- Store at temperatures between 10°C and 30°C / 50°F and 86°F

- The hardening is more rapid at higher temperatures and slower at low temperatures

MIXING RATIO

Component A : Component B = 100 : 25