Epoxy Extra Ctr Transparent Fluid Epoxy Adhesive

COMPOSITION

COMPONENT A: Fluid epoxy transparent resin (molecular weight >700)

COMPONENT B: Mixture of cycloaliphatic amines and agents of catalysis USE Permanent gluing of marble, natural stones to each other ot to other materials (metal, cement, concrete etc.)

COLOUR Transparent MIXING RATIO Epoxy adhesives require exact mixing ratio, in weight, between component A (resin) and component B (catalyst). In this case the ratio is: COMPONENT A : COMPONENT B = 100 : 50 (for example: 1 kg. of component A mixed with 0.5oo kg. of component B

PACKAGING

EPOXY EXTRA CTR component A can of 0.8oo kg. - kg. 10 - kg. 20 EPOXY EXTRA CTR component B can of 0.4oo kg. - kg. 5 - kg. 10

SURFACE PREPARATION Surface to be treated/glued to be porous, clean, dry and free from dust, grease or any other alien substance MIXING Mix the quantities as indicated in MIXING RATIO above until completely blended

APPLICATION With putty knife or spreading . Do not apply at temperature lower than +10°C (50°F) Suggested application temperature between +10 (50°F) and +30°C (86°F)

THICKNESS The best adhesive characteristics are obtained with thicknesses of adhesive from 0.3 to 1.0 mm

CONSUMPTION 250 to 700 gr/m²

POLYMERISATION The rate of reaction increases with the temperature, witch should never fall below +10°C (50°F).

HARDENING at 25°C (77°F) 65 minutes in mass, 190 minutes in thin coat (applied).

NOTE based on the data reported, workability time is considered to be 30 to 35 minutes Do not store at temperature lower than +10°C (50°F) and higher than +35°C (95°F) Protect from frost the stored cans/tins

SHRINKAGE COEFFICENT 0,3 %