acrylic, polyurethane sealant, epoxy sealants, Stone adhesives, abrasives, waxes, Sealers and impregnators
acrylic, polyurethane sealant, epoxy sealants, Stone adhesives, abrasives, waxes, Sealers and impregnators
Many are the advantages of the adhesive bonding compared to the mechanical bonding. Possibility of bonding/gluing different materials, higher stiffness, loads distribution more even, strengthening of the bonded parts, no holes potentially damaging because of the consequent tension concentration, higher resistance to the fatigue, lower costs of intervention. Basic properties of this new epoxy formula of General are the great stability and the absolute non-dripping of the product: the parts bonded by using EPOXY SKY remain immediately fixed in position in vertical walls, too. FUNCTION STRUCTURAL ADHESIVE/GLUE LINE ADHESIVES/GLUES BUILDING / CIVIL ENGINEERING INDICATION GLUING: MARBLE, GRANITE, NATURAL STONES, CERAMIC TILES, SLABS, CEMENT WALLS, BRICKS. FILLING / REPAIRING: BASINS OR TANKS, TUBES, CEMENT COLOUMNS, FIBERGLASS, etc. COLOUR Light beige or eventual other color on request MATERIALS ALL THE STANDARD STONE MATERIALS USED BY BUILDING INDUSTRY: MARBLE, GRANITE, NATURAL STONE, CONCRETE, CEMENT, METALS, CERAMICS. PREPARING THE SURFACE THE SURFACES MUST BE CLEAN, DRY AND WITHOUT TRACES OF GREASY SUBSTANCES; IT IS SUGGESTED A CAREFULLY DEGREASING AND THE MECHANICAL ABRASION TO HAVE A VERY CLEAN SURFACE. THE SANDBLASTING IS THE BEST METHOD FOR THE DEEP CLEANING AND PREPARATION OF THE SURFACE. CAREFULLY REMOVE FROM THE SUPPORT ALL THE FRIABLE AND DUSTY PARTS. THE ACID WASHING OF THE SURFACE, WITH RELATIVE RINSING AND DRYING, INCREASES THE POROSITY OF THE SUPPORT AND IMPROVES THE ADHESION.. HOW TO USE MIX CAREFULLY WITH THE RATIO 100:100 THE COMPONENT A TOGETHER WITH THE COMPONENT B UNTIL TO OBTAIN A HOMOGENEOUS COLORATION OF THE TEXTURE AND THEN APPLY WITHIN 20-30 MINUTES. IMPORTANT: Apply at temperature not lower than +10°C (50°F) Suggested temperature of application between 10°C and 30°C (50°F and 86°F) TEST Always affect a preliminary test to verify the compatibility of the product with the supports and the effective adhesion degree for the specific conditions. STABILITY KEPT INTO THE ORIGINAL SEALED CONTAINER AND STORED IN DRY PLACE AT THEMPERATURE BETWEEN +5°C AND +35°C (41°F AND 95°F), SHELTERED FROM THE DIRECT SUNRAYS, THE PRODUCT IS STABLE AT LEAST 1 YEAR. Protect from frost the stored cans/tins