Epoxy T.S.E. Transparent Solid Epoxy Adhesive/Glue

COMPOSITION COMPONENT A: Tixotropized pure epoxy resin with pyrogenic silica COMPONENT B: Tixotropized mix of catalysis agents containing adducts of amines, tertiary amines

USE Permanent gluing of marbles, granites and natural stones between them or with other supports (metals, concrete, terracotta, wood, etc…)

\MIXING RATIO The epoxy adhesives/glues need exact mixing ratio in weight between the component A (resin) and component B (catalyst). In this case: COMPONENT A : COMPONENT B = 100 : 50 (i.e. 100 gr. of component A mixed with 50 gr. of component B) COLOUR TRANSPARENT opaque PACKAGING EPOXY T.S.E. component A metal tin of 1.o kg. EPOXY T.S.E. component B metal tin of 0,5 kg.

SURFACE PREPARATION The pieces/surfaces to be treated/glued must be porous, dry and clean, free from dust and alien substances MIXING Dose and mix in the best careful way. Take from the can the needed quantity of the two components (keep the ratio 2A:1B in weight) and mix carefully some minutes.

APPLICATION By putty knife or spreading. Do not apply at temperature lower than +10°C(50°F) Suggested temperature of application between +10°C (50°F) and +30°C (86°F)

THICKNESS The best adhesive characteristics are obtained with thicknesses of adhesive from 0.3 to 1.0 mm CONSUMPTION 250 - 700 g/sq.meter

POLYMERIZATION The hardening is a progressive reaction in the time of bond development and strengthening; cold and heat dispersions slow down (some times, very much) this reaction. Do not apply at temperatures lower than +10°C (50°F); below this temperature the hardening of small quantities or thin layers can highly slow down and becomes difficult.

HARDENING at 25°C (77°F) 80 - 100 minutes in mass; 200 - 300 minutes in thin layer (applied). Work time is considered to be 30 to 50 minutes