Water-Based Brillo Silicone Wax

Water-based Brillo is a water-based silicone wax that allows to increase and uniform the gloss on marble and granite. It cancels the polishing gap that may be present on the artifacts, covers any signs of abrasive processing and protects the surface from stains. It has a good hydro-oil repellent capacity. In addition, it is permeable to vapor; the breathability of the various treated surfaces remains practically unchanged.

PRODOTTO
BRILLO WATER BASED (M8102)
CARATTERISTICHE
Brillo is a water based siliconic wax that increases and makes evenly polish marbles and granites. It
fades away polishing differences that could be present on stones, covers abrasive signs and, at the
same time, gives stain protection. Brillo has got an excellent waterproof capacity and is permeable
to the vapor.
DATI TECNICI
Specific weight 995 ± 20 g/l (MI 001)
Physical state liquid
Color Light white
STORAGE
Keep the container well closed and stored in a cool (temperature below 25°C) and ventilated
environment for a maximum period of 12 months from the date of production marked on the tin.
Avoid direct sun exposure.
SAFETY RULES
Keep the place ventilated while applying the product and when it dries. It is recommended the use
of personal protective equipment during application. Read carefully the safety data sheet before
application.
STORAGE
BRILLO is supplied ready-to-use, but it is possible to dilute it with water, alcohol or a mixture of
these two solvents, but the best performances are obtained without dilution. Alcohol addition (ethyl
or isopropyl) could be necessary to accelerate evaporation for particular applications. However
preliminary tests are mandatory and it is advisable to not exceed 65% of dilution to not nullify the
product action.
Application should take place on dry surfaces by using low-pressure airless spray gun, brush or
roller: in any case take care to ensure an even application.
Preliminary tests shall determine the right quantity of the product to be used since that depends on
the different material absorption. Once applied, allow it to dry for a few minutes, then wipe it with a
dry and clean cloth for the finishing polish.
All surfaces not to be treated must be protected by plastic sheets.