Multi Wire Saw Machine For Stone Block Cutting

1.Classic triangle structure and higher cost performance.
2.Stable and reliable columns ensure smooth operation.
3.Bearing and lead screw adopt automatic grease lubrication and the lifetime of key bearings can reach 10,000 hours.
4.The driving wheel and the two guide wheels are installed with a 0.5 deflection angle, which can promote the rotation of the wires and increase the life of the wires,
meanwhile improve the quality of the slab surface.
5.15.5inches HD operation screen and user-friendly operation interface realizes the automatic cutting.
6.Remote mode configured, which helps to monitor the operation of the machine and solve problems remotely.
7.Servo lift enables accurate stroke positioning and the minimum feed speed can reach 2cm/h.
8.Convenient climbing ladder and platform as well as sliding doors of the the top and both side protective covers makes wires installation and machine maintenance easier.
9.Independent hydraulic tensioning equipped with balance cylinder.Tension and balance are integrated in the same hydraulic system, which is easy for operation.
10.The protective cover is made of 304 stainless steel which prevents the machine from rusting.
11.Homemade polyurethane rubber can be delivered faster and costs lower. What’s more the lifetime of the guide wheel rubber can reach 2000 hours.
12.7*24h Rapid Respond

Parameters	Unit	7.3MM	6.3MM	4.3MM
Worktable max. rotate angle	°	not allowed	not allowed	not allowed
Wires set width	mm	7.3	6.3	4.3
Approximative Weight	T	25-62	50-62	50-62
Voltage/Frequency	V/Hz	it depends on which country	it depends on which country	it depends on which country
Pitch groove wire driving	mm	2450	2450	2450
Cooling water(min. required pressure 3.5 bar)	L/min	150-1500	1000-1500	1500
Wire pitch for sawing 30mm thick.	mm	38	37.2	none
Machine length (L)	mm	11200	11200	11200
Diamond wire length	m	21.52	21.52±0.02	21.52
Slabs nominal thickness	mm	20/30/40/50/60/70/80/90/100	20/30	18
Worktable load capacity	T	40-80	80	62
Output number of slabs 30mm per linear mt.	nr	it depends	it depends	it depends
Max. individual diamond wire tension	Kg	220-260	180-220	160-200
Installed electrical power	kw	57-300	110-300	220-300
Max. Cutting length	mm	3400	3400	3400
Fast lowering unit power	kw	37	132	200
Max. Cutting width	mm	600-2100	600-2100	1600-2100
Max. Cutting height	mm	2100	2100	2100
Machine width (W)	mm	2600-7400	4500-7400	4500-7400
Max. Number of wires for sawing 30mm thick.	nr	76	76	88
Production efficiency 20mm thick.	m2/h	it depends，contact us to know more details	it depends，contact us to know more details	it depends，contact us to know more details
Machine height (H)	mm	6500	6500	6500
Diamond wires speed	m/s	0-35	0~35	0~35
Main motor power	kw	37-280	90-280	200-280
Output number of slabs 20mm per linear mt.	nr	it depends	it depends	it depends
Dim. Trolley Size/Worktable size	mm	2000*2500-2500*3200	2500*3200	2500*3200
Wire pitch for sawing 20mm thick.	mm	28.5	27.9	24.8
Diamond bead diameter	mm	7.3	6.3	4.3
Max. Number of wires for sawing 20mm thick.	nr	76	76	88

• 
• 
• 
• 

• 

  PU Liner

• 

  SCHNEIDER(French) PLC+touch screen

• 

  Diamond wire saw

• 

  NSK(Japan) bearings

• 

  YASKAWA(Japan)Inverter

• 

  diamond wire saw