Machinery Function Features
Chain saws machines, Stationary machines for laboratory / sawmill
Chain saw machine
The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna.
The machine is self powered and is autonomous both in handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts.
Arms and chains are available for cutting up to 3.25 meters.
Our company offers the possibility to mount the following chains in order to optimize cutting performance on different materials:
chains 38/40/42 mm with 8 edges tools
42 mm chain with 4 edges tools ;
38/40/42 mm chain with PCD tools for hard stones
TECHNICAL FEATURES
Terna CST 965
Arm rotation 90°
Vertical stroke 3000 mm
Orizontal stroke 2000 mm
Available lenghts of arm (Useful cut) da/from 2 m – a/to 3.25 m
Cut width 38-40-42 mm
Weight of cutting unit 3500 kg
Total weight, including tractor 10.000 kg
Grease tank capacity 7 kg
Grease capacity 0,3 – 1 kg
Hydraulic oil tank capacity 150 litri / litres
Diesel comsumption 7 – 10 l/h
Round per minutes of the chain rotation pinion 65 rpm
Round per minutes of the diesel engine 1400-1500 rpm
Rear gear movement maximum slope 21%
Accessories for chain saw
VACUUM
Vacuum designed to remove large quantities of dust and of the waste granular material produced by the chain saw cutting.
The waste material is removed from the accumulation zone adjacent to the cut by means of a fl exible hose and of a suction cup.
The vacuum can be installed on a trailer moving on the rails along with the chain saw.
The waste material is deposited on the ground, in the opposite side of the cut.
WORM
Worm designed to carry and to remove automatically large quantities of dust and of the waste granular material produced by the chain saw cutting.
The cut waste material is carried in the feed-box of the worm, and then deposited on the ground, at 2 meters distance from the cut.
CHAINS
1 – CHAIN PITCH 121MM
Larghezza di taglio 38 mm
Sono disponibili portainserti per utensili tipo:
– WIDIA 8 Taglienti
– PCD Ø 13 mm
– PCD 8 mm
2 – CHAIN PITCH 110MM
Cutting width 42
Available toolholders for tools type:
– WIDIA 4 Cutting edges
– PCD Ø 13 mm
– PCD 9.4 mm
3 – MONO-LINK CHAIN 74 MM PITCH
Cutting width 42
Available toolholders for tools type:
– WIDIA 4 Cutting edges
– PCD Ø 13 mm
– PCD 9.4 mm