Home
Stone Shop
Shopping Cart
Suppliers
Products
Stone Library
Stone Fair
Post Need
Message
Favorites
Get App
Logout
stone CNC router, marble carving machine, granite engraving machine, marble granite cnc machine, cnc tools for marble granite, cnc spare parts
stone CNC router, marble carving machine, granite engraving machine, marble granite cnc machine, cnc tools for marble granite, cnc spare parts
1.8 Degree CNC Router DC Step Motor 2 Phase Hybrid Stepping Motor for DIY CNC Router Plasma
Model: 57BYGH311-01
Stepper motors are commonly recommended for applications that are cost-sensitive and low maintenance. CNC stepping motors provide stability and flexibility. This stepping motor is a hybrid 2 phase stepping motor for cnc router machine movement driving.
1.8 Step Motor Features:
Model: 57BYGH311-01 (42BYGH, 85BYGH, 86BYGH optional)
Stepping angle: 1.8°±5%
Voltage: 3.6V
Current: 3A
Phase: 2 phase
Max static torque: 15kg/cm
Diameter for the center shaft: 8mm or 6.35mm
Net Weight: 1.1kg
Temperature Rise: 80° Max
Ambient Temperature: -20° ~+50°
Insulation Resistance: 100 MΩ Min., 500VDC
Dielectric Strength: 50Hz 1 Minute 500V Min
Shaft Radial Play: 0.02Max
Shaft Axial Play: 0.1-0.3
Payment can be made by Western Union, Paypal, T/T.
Welcome your inquiry!
A cnc router dc motor is a brushless, synchronous electric motor that converts digital pulses into mechanical shaft rotation.
Every revolution of the stepper motor is divided into a discrete number of steps, in many cases 200 steps, and the motor must be sent a separate pulse for each step. The stepper motor can only take one step at a time and each step is the same size. Since each pulse causes the motor to rotate a precise angle, typically 1.8°, the motor's position can be controlled without any feedback mechanism. As the digital pulses increase in frequency, the step movement changes into continuous rotation, with the speed of rotation directly proportional to the frequency of the pulses. Step motors are used every day in both industrial and commercial applications because of their low cost, high reliability, high torque at low speeds and a simple, rugged construction that operates in almost any environment.
There are three basic types of step motors: variable reluctance, permanent magnet, and hybrid.
Standard hybrid stepping motors have 200 rotor teeth, or 200 full steps per revolution of the motor shaft. Dividing the 200 steps into the 360° of rotation equals a 1.8° full step angle. Normally, full step mode is achieved by energizing both windings while reversing the current alternately. Essentially one digital pulse from the driver is equivalent to one step.
The stepper motor driver receives step and direction signals from the indexer or control system and converts them into electrical signals to run the step motor. One pulse is required for every step of the motor shaft. In full step mode, with a standard 200-step motor, 200 step pulses are required to complete one revolution. The speed of rotation is directly proportional to the pulse frequency.
Standard hybrid motors have 200 rotor teeth and rotate at 1.8º step angles. Because they exhibit high static and dynamic torque and run at very high step rates, hybrid step motors are used in a wide variety of commercial applications including computer disk drives, printers/plotters, and CD players. Some industrial and scientific applications of stepper motors include robotics, cnc engraving machine,cnc laser cutting machine, plasma cutting machine, machine tools, pick and place machines, automated wire cutting and wire bonding machines, and even precise fluid control devices.
Elte Spindle Motor Hsd Spindle for Cnc Router
Hsk63f Tool Cradles Cnc Toolholder Forks Tool Clip
Edgebander Chain Tack Pad Pressure Roller Wheel
Rubber Gasket Seal for Cnc Vacuum Pods
Biesse Vacuum Pad Valve Insert Shutter Assembly
Bt30 Tool Clips Bt Tool Holder Fork for Cnc Router
Ina Linear Guide Blocks Kwve Linear Bearing Guides
Soft Pod Gasket Vacuum Cups Replacement 120x50mm