Abrafast Strip Polishing Abrasives

ABRAFAST
Abrafast are the strips of abrasives with velcro shown in the photos below, which are part of the new patented sanding system.
Basically these strips are installed in a plate that blocks them and makes them work in a very particular way, new, different and unconventional, which causes the abrasive to be 2 times faster in its action than the classic round diamond disc.
Normally they pass after a grain of 120 giving precisely the grain 300 and then the 1000 and that's it (with a total time for both grain of 1 minute / m2).
Abrafast is available in grits from 220 to 10000, has a very low cost and a high duration, 6 of them must be placed under the appropriate plate.
It must also be considered that this type of abrasive also leaves a shinier finish with the same grain size compared to the classic round disk, for example the 300 grain of Abrafast is shiny like a classic resinoid diamond 500 (therefore, as some do, it could also already be polish only after 300 grit abrafast).
And again, abrafast is used for all floors in stone, marble, granite, gres, terrazzo, etc.