Home
Stone Shop
Shopping Cart
Suppliers
Products
Stone Library
Stone Fair
Post Need
Message
Favorites
Get App
Logout
Ecuador
Company Description
Concrete pavers "Tiger", are produced from raw materials classified: river sand, gravel, portland cement type I, imported iron oxides for pigmentation, water and additives (plasticizers, accelerating). The combination of all raw materials runs on a Plant Industrial Electronics Pavers, of German origin, Zenith, the same applies the technique of hydraulic vibro-compression to 10,000 RPM to achieve an average strength 350kg / cm2 cobblestone 6cm thickness
INEM STANDARD: To produce Pavers are meets the specifications of the Technical Standard INEN 1488.
TESTING RESISTANCE: The resistance check is standing at the Soil Laboratory of the University of Cuenca (compression test).
INSTALLATION: The surface to receive concrete pavers Tiger, must comply with the existing features and technical standards for this type of pavement (base, climb a sand bed 2-3 ctms, the pavers are placed, the auction is running over a sand and cement mortar, then a sweep of fine sand is, this is for sealing joints).
INSTALLATION PROCESS RECOMMENDATIONS: It is recommended to compact the cobbled penetrate the fine sand into the joints uniform way surface, this avoids the presence of vegetation. Should also use a "stabilizer Boards" available on the market, this prevents the ingress of moisture, it can alter the conditions of soil density, causing subsidence.
MAINTENANCE AND CLEANING: The paved surface will have greater durability and improved traffic conditions subject to compliance with the technical standards of installation.
INEM STANDARD: To produce Pavers are meets the specifications of the Technical Standard INEN 1488.
TESTING RESISTANCE: The resistance check is standing at the Soil Laboratory of the University of Cuenca (compression test).
INSTALLATION: The surface to receive concrete pavers Tiger, must comply with the existing features and technical standards for this type of pavement (base, climb a sand bed 2-3 ctms, the pavers are placed, the auction is running over a sand and cement mortar, then a sweep of fine sand is, this is for sealing joints).
INSTALLATION PROCESS RECOMMENDATIONS: It is recommended to compact the cobbled penetrate the fine sand into the joints uniform way surface, this avoids the presence of vegetation. Should also use a "stabilizer Boards" available on the market, this prevents the ingress of moisture, it can alter the conditions of soil density, causing subsidence.
MAINTENANCE AND CLEANING: The paved surface will have greater durability and improved traffic conditions subject to compliance with the technical standards of installation.
