Tundra Grey Sintered Stone

Tundra Grey Sintered Stone is an artificial stone meticulously crafted with state-of-the-art technology to replicate the exquisite beauty of the natural Tundra Grey Marble. This engineered stone boasts dark silver-gray veins and distinctive features set against a backdrop of light ash gray, closely mimicking the sophisticated appearance of the original Tundra Grey Marble. Manufactured in various thicknesses, including 0.6mm, 0.8mm, 10.00mm, 12.00mm, 14.00mm, 16.00mm, 18.00mm, and 20.00mm, the material undergoes a process where a matrix of minerals is heated (or sintered) to form a solid, impenetrable mass.

The surface of Tundra Grey Sintered Stone demonstrates exceptional durability, rendering it impervious to etching, scratching, burning, or staining. Its performance surpasses that of quartz in every measurable aspect. This versatile material finds application in kitchen and bathroom countertops, commercial tops, ornamental stone, stairs, interior and exterior wall and floor applications, mosaic, waterjet patterns, wall panels, table tops, columns, fireplaces, and custom furniture.

Sintered Stone Test Result

Apparent Density..... BS EN 14617-1..... 2390.24 Kg/m3

Water Absorption by mass..... BS EN 14617-1..... % 0.022

Water Absorption by Capillarity..... BS EN 1925..... % 0.0057

Flexural Strength..... BS EN 14617-2..... 54.78 MPa

Flexural Strength (after 25 freeze cycles)..... BS EN 14617-2..... 54.26 MPa

Flexural Strength (after 20 cycle thermal shock)..... BS EN 14617-2..... 54.43 MPa

Coefficient of freeze resistance in flexural strength (after 25 freeze cycles)..... BS EN 14617-5..... 98.5

Coefficient of thermal shock resistance as change in flexural strength (percentage after 20 cycles).... BS EN 14617-6.... % 0.89

Abrasion Resistance..... BS EN 14617-4..... 14.04 mm

Determination of resistance to fixing..... BS EN 14617-8..... 2079.05 N

Chemical Resistance..... BS EN 14617-10..... C4

Impact Resistance..... BS EN 14617-9..... 1.969 J

Linear thermal expansion coefficient..... BS EN 14617-11.....5.788 10-6 (°C-1 )

Thermal conductivity in dry condition..... BS EN ISO 10456..... 1.29 W/m.K

Specific heat capacity..... BS EN ISO 10456..... 840.03 J/kg.K

Slip Resistance for dry honed surface..... BS EN 14231..... 79

Slip Resistance for wet honed surface..... BS EN 14231..... 26