SNM-DEI Heavy Duty Monoblock Bridge Cutting Machine
Stone Factory MachinesStone Slab Cutting MachinesInfrared Bridge Cutting Machine
SNIC
Lebanon
Usage: Granite, Marble, Limestone, Artificial Stone, Sandstone, Travertine
Machinery Function Features
The SNM-DEI is a heavy duty monobloc bridge cutting machine suitable for all factories working in the stone industry. When equipped with suitable tooling it is capable of working marble, granite. Cement etc... it is easy to handle and maintenance free.
The main structure is made of heavy duty steel in order to ensure maximum stability and quality of the machine over time. The table's sliding surface is composed of very thick plates which are machined on five sides.
The bridge is made of a very stiff box type frame and the base of the slide ways is directly machined on the bridge.
The placement of slide ways is quick and expensive and enables this machine to keep its accuracy indefinitely.
Metal shoulders replace conventional concrete walls, facilitating installation and transport of the machine.
The disk is directly mounted on the motor and the machine is suitable for inclined cuts from 0 to 45
The forward and return movement of the head is powered by a brushless AC motor with inverter.
The machine is equipped with end stops both forward and reverse as well as up and down.
The driving system inside gears is case hardened before final grinding.
The machine is equipped with an insulated electric panel as well as an articulated control pendant which enables the operator to control the most important commands: Back/Forward and Up/Down for the head, and a potentiometer to control the advancing speed for both cutting directions.
The electric and tubes for tool cooling are supported by nylon cable holding chains.
All components are mass-produced, safe and of high quality.
Technical Data
Parameters |
Unit |
DEI-30-7.5 |
DEI-35-12.5 |
DEI-50-15 |
Z Axis Stroke |
mm |
200 |
200 |
200 |
Working table dimensions(L×W) |
mm |
3000/3500/4000 x 960+410+270 |
3000/3500/4000 x 960+410+270 |
3000/3500/4000 x 960+410+270 |
Blade diameter |
mm |
300-350 |
350-400 |
40/50 to 500/625 |
Main motor power |
hp |
7.5 |
12.5 |
15 |
After-Sale
-
Warranty: 12 Months
-
Install and Guarantee:Customer pay for installation, Remote guidance installation
-
Maintenance: Remote troubleshooting, Field troubleshooting
Supplier Detail
S.N.I.C.- Societe Nahas Pour L'industrie Et Le Commerce
Established: Jan 01,1962
Lebanon
Main Product:
stone machinery, cutting machines, polishing machines
Kamal K. Nahas
Tel:
+961 3 652 782
Adr:
12022090 Jdeidet El Metn, Beirut - P.O. Box 90-1159 Beirut, Lebanon
Visit Store