SNM-DEI Heavy Duty Monoblock Bridge Cutting Machine

The SNM-DEI is a heavy duty monobloc bridge cutting machine suitable for all factories working in the stone industry. When equipped with suitable tooling it is capable of working marble, granite. Cement etc... it is easy to handle and maintenance free.
The main structure is made of heavy duty steel in order to ensure maximum stability and quality of the machine over time. The table's sliding surface is composed of very thick plates which are machined on five sides.
The bridge is made of a very stiff box type frame and the base of the slide ways is directly machined on the bridge.
The placement of slide ways is quick and expensive and enables this machine to keep its accuracy indefinitely.
Metal shoulders replace conventional concrete walls, facilitating installation and transport of the machine.
The disk is directly mounted on the motor and the machine is suitable for inclined cuts from 0 to 45
The forward and return movement of the head is powered by a brushless AC motor with inverter.
The machine is equipped with end stops both forward and reverse as well as up and down.
The driving system inside gears is case hardened before final grinding.
The machine is equipped with an insulated electric panel as well as an articulated control pendant which enables the operator to control the most important commands: Back/Forward and Up/Down for the head, and a potentiometer to control the advancing speed for both cutting directions.
The electric and tubes for tool cooling are supported by nylon cable holding chains.
All components are mass-produced, safe and of high quality.

Parameters	Unit	DEI-30-7.5	DEI-35-12.5	DEI-50-15
Blade diameter	mm	300-350	350-400	40/50 to 500/625
Working table dimensions(L×W)	mm	3000/3500/4000 x 960+410+270	3000/3500/4000 x 960+410+270	3000/3500/4000 x 960+410+270
Main motor power	hp	7.5	12.5	15
Z Axis Stroke	mm	200	200	200