QD Self-undercutting Middle Duty Anchor Bolt Applicable for: Concrete (Grade C15) Natural stone Solid brick wall Hollow brick wall Aerated brick wall Range of use: Steel structure Curtain wall Railing Cantilever bracket Cable tray Mechanical equipment Elevator Stair Door & window
Description of the product: 1. Pre-insert self-undercutting heavy duty anchor bolt 2. Drill a hole at a time with a universal drill. 3. Slightly tap the anchor bolt with a hammer to put it to its effective depth. When fastened with the nut of the anchor bolt by a spanner, the upper and lower self-undercutting positions will cut the bottom in two ways. At two self-undercutting positions, the anchor bolt is fixed on the base material in trapezoid fastening status. At this time, the bolt obtains fastening force in two ways. 4. Grade 6.8 for carbon steel SS A2-70 and A4-70 products are available and anchor bolts manufactured under special requirements can also be supplied.
Advantages of the product: 1. The anchor bolt will be anchored in two ways with excellent aseismatic performance and high security assurance. 2. The action directions of the anchor bolt at two self-undercutting positions are adverse, which may offset the expansion strain and result in small edge distance for anchoring. 3. ( In comparison with chemical anchor bolt) Upon the completion of Installation, the anchor bolt can immediately bear maximum design load without waiting.
Installation of pre-insert ( anchor bolt of QD type) Step 1. Drill and clear dust Step 2. Plug in anchor bolt Step 3. Fix the anchored component part Step 4. Tighten the anchor bolt screw nut.