diamond wire, diamond segment, diamond saw blade, polishing abrasives, wire saw machine, block cutting machine, drill bit drill rod dth hammer
Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$27000-45000
QCNG China
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Parameters | Unit | QCXE-1500 | QCXE-1800 | QCXE-2200 |
---|---|---|---|---|
Block max. weight | kg | 20000 | 30000 | 50000 |
Block length | mm | 2000 | 2000 | 2000 |
Block max. widht | mm | 3200 | 3500 | 3500 |
Wire-driving unit rotation | Gradi Degrees | no | no | 360 |
Approximative Weight | kg | 7000 | 10500 | 14000 |
Total water requirements | l/min | 50 | 50 | 50 |
Diamond wire length | mm | 18100 | 19300 | 21250 |
Min. water pressure required | bar | 25 | 25 | 25 |
Overall dimensions (without perimeter fencing) lenght | mm | 7500 | 8800 | 9800 |
Wire actuating motor power | kW | 11 | 11 | 15 |
Speed of wire lifting/lowering | mm/h | 0-1800 | 0-1800 | 0-1800 |
Horizontal travel of the wire-driving unit | mm | 2300 | 3500 | 3500 |
Max. span for horizontal passage between the wire driving pulleys | mm | 3300 | 3600 | 3600 |
Total installed power | kW | 19.38 | 19.38 | 24.03 |
Max. inclination of the wire-driving unit | Gradi Degrees | no | no | no |
Diameter of new diamond wire | mm | 7.3~11.0 | 7.3~11.0 | 7.3~11.0 |
Block-holding trolley travel | mm | 2300 | 3500 | 3500 |
Block max. height | mm | 1500 | 1800 | 2100 |
Block-holding trolley dimensions | mm | 1360x2000 | 1800x2000 | 3000x2000 |
Overall widht | mm | 6000 | 6800 | 7000 |
Overall height | mm | 3800 | 4800 | 5200 |
slab cutting
profiling
Payment required
Payment required
Payment required
diamond wire
8.5/8.8/10.5/11.0mm
pulley
rubber belt/ring
Lead Time: 3 weeks
Warranty: 12 Months
Install and Guarantee:Customer pay for installation
Maintenance: Online software upgrade
diamond wire, diamond segment, diamond saw blade, polishing abrasives, wire saw machine, block cutting machine, drill bit drill rod dth hammer