diamond wire, diamond segment, diamond saw blade, polishing abrasives, wire saw machine, block cutting machine, drill bit drill rod dth hammer
Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$27000-45000
QCNG China
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Parameters | Unit | QCXE-1500 | QCXE-1800 | QCXE-2200 |
---|---|---|---|---|
Max. inclination of the wire-driving unit | Gradi Degrees | NO | NO | NO |
Block length | mm | 2000 | 2000 | 2000 |
Speed of wire lifting/lowering | mm/h | 0-1800 | 0-1800 | 0-1800 |
Approximative Weight | kg | 7000 | 10500 | 14000 |
Block max. height | mm | 1500 | 1800 | 2100 |
Total water requirements | l/min | 50 | 50 | 50 |
Wire actuating motor power | kW | 11 | 11 | 15 |
Wire-driving unit rotation | Gradi Degrees | NO | NO | 360 |
Overall height | mm | 3800 | 4800 | 5200 |
Horizontal travel of the wire-driving unit | mm | 2300 | 3500 | 3500 |
Block-holding trolley dimensions | mm | 1360x2000 | 1800x2000 | 3000x2000 |
Overall widht | mm | 6000 | 6800 | 7000 |
Max. span for horizontal passage between the wire driving pulleys | mm | 3300 | 3600 | 3600 |
Total installed power | kW | 19.38 | 19.38 | 24.03 |
Block max. weight | kg | 20000 | 30000 | 50000 |
Min. water pressure required | bar | 25 | 25 | 25 |
Block-holding trolley travel | mm | 2300 | 3500 | 3500 |
Diameter of new diamond wire | mm | 7.3~11.0 | 7.3~11.0 | 7.3~11.0 |
Diamond wire length | mm | 18100 | 19300 | 21250 |
Block max. widht | mm | 3200 | 3500 | 3500 |
Overall dimensions (without perimeter fencing) lenght | mm | 7500 | 8800 | 9800 |
profiling
slab cutting
Payment required
Payment required
Payment required
diamond wire
8.5/8.8/10.5/11.0mm
pulley
rubber belt/ring
Lead Time: 3 weeks
Warranty: 12 Months
Install and Guarantee:Customer pay for installation
Maintenance: Online software upgrade
diamond wire, diamond segment, diamond saw blade, polishing abrasives, wire saw machine, block cutting machine, drill bit drill rod dth hammer