diamond wire, diamond segment, diamond saw blade, polishing abrasives, wire saw machine, block cutting machine, drill bit drill rod dth hammer
Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$29000-45000
QCNG China
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Parameters | Unit | QCXE-1500 | QCXE-1800 | QCXE-2200 |
---|---|---|---|---|
Block max. height | mm | 1500 | 1800 | 2100 |
Block-holding trolley travel | mm | 2300 | 3500 | 3500 |
Block max. widht | mm | 3200 | 3500 | 3500 |
Diameter of new diamond wire | mm | 7.3~11.0 | 7.3~11.0 | 7.3~11.0 |
Block max. weight | kg | 20000 | 30000 | 50000 |
Block-holding trolley dimensions | mm | 1360x2000 | 1800x2000 | 3000x2000 |
Overall height | mm | 3800 | 4800 | 5200 |
Wire peripheral speed | mm/sec | 0-40 | 0-40 | 0-40 |
Horizontal travel of the wire-driving unit | mm | 2300 | 3500 | 3500 |
Diamond wire length | mm | 18100 | 19300 | 21250 |
Max. span for horizontal passage between the wire driving pulleys | mm | 3300 | 3600 | 3600 |
Speed of wire lifting/lowering | mm/h | 0-1800 | 0-1800 | 0-1800 |
Total installed power | kW | 19.38 | 19.38 | 24.03 |
Block length | mm | 2000 | 2000 | 2000 |
Overall dimensions (without perimeter fencing) lenght | mm | 7500 | 8800 | 9800 |
Wire-driving unit rotation | Gradi Degrees | no | no | 360° |
Max. inclination of the wire-driving unit | Gradi Degrees | no | no | no |
Total water requirements | l/min | 50 | 50 | 50 |
Approximative Weight | kg | 7000 | 10500 | 14000 |
Overall widht | mm | 6000 | 6800 | 7000 |
Min. water pressure required | bar | 25 | 25 | 25 |
Wire actuating motor power | kW | 11 | 11 | 15 |
profiling
slab cutting
Payment required
Payment required
Payment required
Diamond wire
8.5/8.8/10.5/11.0mm
Pulley
rubber belt/ring
Lead Time: 3weeks
Warranty: 12 Months
Install and Guarantee:Customer pay for installation
Maintenance: Online software upgrade, Remote troubleshooting
diamond wire, diamond segment, diamond saw blade, polishing abrasives, wire saw machine, block cutting machine, drill bit drill rod dth hammer