Tiles natural cleft

The top surface of the tiles is natural cleft. The edges can be split or sawn. The cut is parallel and perpendicular to the surface. The angles are right. The widths go in multiples of 50 from 100 to 400 for the tiles with split edges, and from 150 to 400 for the sawn ones. The tolerance on the width is +/- 10 on the tiles with split edges and +/- 30 with sawn edges. The length is random. It is also possible, on request, to have tiles with fixed length. The tiles are divided into two categories depending on their thickness: from 30 to 60 for exterior paving without or with light traffic, and from 50 to 80 for high and heavy traffic.

Tiles machined surface

From the blocks is possible to have tiles with worked surface as flamed, brushed, polished, semi-polished, honed, bush-hammered, sand textured. Their edges are always sawn and their thickness is uniform, usually of 20 or 30. Their wide goes from 150 to 500 while their length can be random or fixed.

NATURAL CLEFT - SPLIT OR SAWN EDGES