Frack.Ag,Split.Ag, Crack.Ag Expansive Mortar, Cracking Agent

FRACK.AG is called cracking agent, split agent and sepcial cement by the different people.

Application

It can be used in an almost unlimited range of applications. It's particularly used for breaking, cutting or demolishing dimensional stones, concrete and reinforced concrete. It is ideal for use in situations where surrounding buildings or other structures would be damaged by flying debris or vibration. It maximizes production circle, product output, the usage rate of finished products and therefore profits, in quarrying and mining as it avoids waste of valuable stone.

Working Principle : The FRACK.AG is mixed with water and to be poured into pre-drilled holes and the reaction will generate expansive power in order to crack the rock, blocks,

concrete and other fragile things.

Causion :

1)Please use the right type of product.

2)Pls use the goggles and gloves and don't see the holes closely for more than 1 hours after the pouring.

3)This product is not toxic and please use the clean water to wash immediately if there is anything on your skin.

4)It must be stored in the dry conditions and can be kept more than 1 year.

5)Packing: 5 kg each plastic bag. Wooden crate and paper are on the request.

How to use it?

1. Drilling
Drill holes using Jackhammer and appropriate drill bit specific to the rock type.
Holes should be drilled no further than 30 -60cm apart. Note: In reinforced concrete recommended no more than 20cm apart.
Recommended hole diameter 38mm - 50mm . Depth would be 70-90% of the way thru depending on the type of rock/material to be cracked.

2. Mixing
For regular safety reasons and mixing small amounts by hand, it is recommended to use rubber gloves.
In a bucket, combine 1.5 Liters of water to one 5kgs bag of cracking agent, or combine the cracking agent at a ratio of 1:3 units by weight.
Mix well, using a drill and paddle is recommended. If mixing with a stick or other method, make sure powder is completely dissolved into the water. Mix to a slurry.

3. Filling
Clean holes before filling using air hose remove excess dust from drilling.
Cracking agent slurry should be poured into holes quickly after mixing