stone machines, bridge cutting machine, carving machine
Stone Factory MachinesStone Finishing, Profiling MachinesStone Carving Robot
Donatoni Italy
Usage: Granite, Limestone, Onyx, Quartzite, Sandstone, Travertine
Parameters | Unit | CR01 / CR02 |
---|---|---|
Water consumption | l/min | 3 - 50 |
A1 interpolated axes | ° | ±185° |
Weight capacity on the wirst | kg | 420 |
A1 speed with nominal payload | degree/s | 80° /s |
Number of interpolated axes | nr | 6/7/8 |
Spindle nominal power | kW | 28/S6 |
A5 speed with nominal payload | degree/s | 70°/s |
A6 speed with nominal payload | degree/s | 110°/s |
A6 interpolated axes | ° | ±350° |
A3 interpolated axes | ° | -100° / 144° |
Max. range of action | mm | 3326 |
A3 speed with nominal payload | degree/s | 70°/s |
Standard voltahe/Nominal tension | Volt | 400 |
Installed power | kW | 30 |
Repeatability of positioning | mm | ±0,08 |
Protection class | IP 65 | |
Spindle disk min. diameter | mm | 350 |
A2 speed with nominal payload | degree/s | 75°/s |
A5 interpolated axes | ° | ±120° |
A4 speed with nominal payload | degree/s | 70°/s |
Weight (robots only) | Kg | 2686 |
Machine overall length | mm | 7190 |
Speed rotation max. | rpm | 6000 |
A4 interpolated axes | ° | ±350° |
Class of protection of the central wrist | IP 67 | |
Spindle disk max. diameter | mm | 825 |
Machine overall height | mm | 5400 |
Maximum cutting depth | mm | 260 |
Machine overall width | mm | 7015 |
Spindle tool holder type | ISO 50 | |
A2 interpolated axes | ° | -130° / 20° |
Air consumption | m3/h | 6 - 20 |
Control system | KR C4 |
sculptures
window frames
Columns, sinks, kitchen tops, top sinks
Payment required
MULTIPLATE REVOLVING PLATFORM:
Payment required
Electrospindle
TRACK MOTION
MONOBLOCK FRAME
TOOL PRESETTING
Smart-PAD (included)
Warranty: 12 Months
Install and Guarantee:Customer pay for installation, Remote guidance installation
Maintenance: Online software upgrade, Regular guidance & maintenance
stone machines, bridge cutting machine, carving machine