HNF160 LNG Forklift

Stone Factory MachinesStone Handling, Loading MachinesForklift

SOCMA China China

Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine

Machinery Function Features
HNF160 LNG Forklift Engine



1, Adopts Weichai WP10G220E LNG engine, which Powerful, low emission, high quality and clean, environment-friendly and fuel-saving. And can meet the high efficiency working requirement 2, The power performance of LNG engine is as good as the diesel engine. The endurance is long, LNG truck with 495L LNG air tank can travel for 8 hours



Transmission



1, Adopts Well-known brand hydraulic transmission, with powerful traction force at joint working condition2, Adopts twin turbo hydraulic torque converter,stepless speed change, The transmission system is controlled by single joystick, easy to control 3, Variable speed control valve is with neutral starter device, it is more safe to start the engine



Driving axle



1, Front axle use heavy duty forklift driving axle, with enlarged axle housing, hub,bearings. Spiral bevel gear and wheel rim planetary deceleration increase torsion, with axle housing support, the loading capacity is big, and the life span is long. 2, Adopts no spoke pressure plate type wheel rim, with better supporting force for the hub 3, The rear axle adopts transverse hydraulic cylinder steering mechanism, the structure of the steering axle is compact, the transmission angle can reach 70.5°, which is better to reduce the steering resistance, reduce the wearing of the tyre, increase the smooth when travelling 4, Adopts 4 pcs of heavy duty clamp disc. Brake, thickening brake disc, with rear air tank, 18 times brake air pressure after-burning ratio,The radiation is quick, brake is reliable, operation is more safe



Hydraulic system



1, Adopts full hydraulic load sensing steering system, the turning radius of the rear steering axle is small, the steering is flexibly 2, Adopts double pump confluence work hydraulic system, which reduce the oil consumption and energy 3, Hydraulic system installed with oil return radiator and back pressure protection device, which guarantee the heat balance of the truck



Chassis, Mast



1, SOCMA implement the Structural optimization scheme together with Fujian Institute Research, Chinese Academy of Science. The forklift has been tested for its strength and stiffness , its life span has been assessed. 2, SOCMA adopts the FEA analysis, Force cloud diagram simulation operation, optimize the structure design and guarantee the safety of the products.Adopts long wheel base, box-type double beam chassis, with features of good rigidity and strength, guarantee the high reliability of the chassis 3, Mast lowering adopts speed-limited valve and pressure selector valve, which reduce the impact to the hydraulic system. The mast can be lowered down to the ground when the engine stalled. 4, The inner and outer mast is combined by roller, fall block force-saving structure, the life span of the mast is long, with high reliability.5, The mast lifting height can be more than 3.5m, high mast, low mast, standard mast with variable attachment is available as options.



Fork carrier



1, Adopts quick hitch fork carrier, easy to replace 2, Hydraulic fork positioner, easy to adjust 3, Cascade high strength fork, high intensity, more durable and double the lift span



Tyre



Adopts block deepening heavy duty forklift tyre, the rear steering axle can swing around center, with good traction performance and passage capacity.



Luxurious cab



1, Adopts adjustable steering wheel, comfortable Aero seat, Aero joystick pilot control, the control is flexibly.2, Luxurious wide view cab with skylight, low noise, good sealing, easy to observe the surrounding for the operator3, The cab is with fan, Radio, warm and cooling A/C, rear view monitor, weight scale can be an option 4, Adopts domestic high quality electrical component, maintenance-free battery, the electrical wire adopts anti flame retardancy material, which is more reliable and durable



Summarization



1, The truck is high-end atmospheric grade2, The component is domestic, high-standard, high cost effectiveness, the spare parts are compatible, easy to maintain 3, It is widely used for loading,unloading, stacking and short distance transportation at airport, seaport, dock, truck station and warehouse
Technical Data
Parameters Unit HNF-160LNG
Min. Turning radius mm 5800
Fork length mm 1800
Approx. Weight Kg 25000
Max. lifting height mm 3500
Load Center mm 900
Wheel base mm 3800
Fork width mm 180
Wheel read (Rear) mm 2330
Lifting speed (loaded) mm/s 300
Climb ability % 20
Rated Loading Capacity kg 16000
Machine overall width mm 2750
Rear tyre 2*12.00-20/18PR
Mast tilt angle (Front/rear) ° 6/12
Wheel read (Front) mm 2060
Front tyre 4*12.00-24/18PR
Machine overall length mm 7645
Min. Ground clearance mm 265
Machine overall height mm 3625
Engine LNG Weichai
Travel speed km/h 30
Consumables
Supplier Detail
Fujian SouthChina Heavy Machinery Manufacture Co., Ltd
Established: Mar 15,2008
China China Verified
Main Product:

heavy forklift trucks, diesel forklift, container forklift trucks, teleh lers, reach stacker, telescopic forklift

user img
Mr.Aaron Liu
Tel: 86-592-565066
Adr: Taiwanese Investment Park, Quanzhou, Fujian Province, China
Visit Store
Categories:
Related Searchs: