POLYONE Multiwire Marble, Granite Block Cutting Machine

A unique and patented feature of the POLYONE series consists of a special wire winding geometry that allows two cuts in the block for each diamond wire. With the POLYONE 20 version it is therefore possible to obtain 20 cuts in the block with 10 wires to realize 1 cm thicknesses, 14 cuts of 2 cm with 7 wires, and 10 cuts of 3 cm with 5 wires.

The compactness of the machine and its geometry allow a minimum need of manpower for the management of the wires, an optimized use of the diamond wire for each material, the 50% reduction of the devices necessary for the management of the wires and a consequent reduction of the maintenance costs.

The thickness change is quick through the correct positioning of the wires in the grooves of the guide-drums.

The diameter of the tensioning flywheels and of the motor flywheels is 1 m, while four 40 cm diam. independent guide groups assure the support for the maximum precision in the 2 cutting phases for each diamond wire.

Parameters	Unit	POLYONE 20
Main motor power	kW	55
Max. Cutting length	mm	3500
Noise level	dBA	90
Max. Cutting height	mm	2100
Machine length (L)	mm	10200
Output number of slabs 20mm per linear mt.	nr	20
Diamond wire length	mm	20600
Machine width (W)	mm	2200
Diamond wires speed	m/sec.	0 ÷ 40 mt/s
Diamond bead diameter	mm	5.3
Approximative Weight	Kg	15000
Machine height (H)	mm	4700
Max. Number of wires for sawing 20mm thick.	nr	10