Modulgranito -Pedrini Arco di Trionfo M594-M595-M596 Cutting Center for Granite Blocks

High production cutting centre for sawing granite blocks into strips.
It is composed of three main units: vertical discs unit, horizontal disc unit and automatic unloader unit.
Arco di Trionfo works on stationary block and it is manufactured in different versions according to the number and diameter of the vertical discs. It is used both for the production of strips for modulgranito and for up to 100 mm thickness elements for exterior paving.
This machine, that operates on stationary blocks, cuts and deposits on pallets 460/650 max. wide strips with thickness dimension from 10 mm for modulgranito up to 80 mm for paving stones.
The machine can work even without block carrier trolleys since all movements are performed by the operational units.
The large machine dimensions allow for optimal workforce utilization, easy use and very reduced dead time even in case of small blocks processing.
ARCO DI TRIONFO maintains in time top cutting precision with minimum diamond disks consumption and very reduced costs for production maintenance and depreciation.
The unit for vertical cuts, that comprises two bridge holding mobile uprights connected by one structural arc, is an extremely rigid and heavy structure, made in normalized large thickness steel work, with the two very large foot bases laying in a stable and consistent way on the track ways that are fixed onto the foundations.
The discs holder trolley, driven by a gear motor/pinion/rack system, slides along two “V” guides in oil bath with the interposition of anti friction slides. In addition to this,four contrast wheels compact trolley and bridge to realize a “clearance-free” trolley sliding system.
The discs stack, that is positioned on the trolley/bridge/mobile uprights assembly centreline, favours the whole discs holder trolley mass to integrate in a balanced way the contrast wheels action.

Parameters	Unit	M594	M 595/80	M 595/100	M596
Approx. Weight	Kg	32000	30000	32000	36000
Version VK disks diameter	mm	-	1000/1600	-	1000/1600
Bridge locking pump motor power	kw	0,37	0,37	0,37	0,37
Vacuum Pump Motor Power	kw	3	2.2	2.2	3
Suckers Pad Vertical Stroke(V axis)	mm	2300	2300	2300	2300
Disks motor VS 160 - VZ 200	kw	160/200	250	320	250
Bridge transversal movement axis motor power	kw	3 x 2	3 x 2	3 x 2	3 x 2
Max strips width	mm	460	460	460	460
Bridge Stroke (W axis)	mm	7900	according to lay out	according to lay out	6250
Suckers Pad Extension	mm	1100	300	700	550
Unloading Units Strips Width	mm	300/650	300/610	300/610	300/610
Suckers Pad Rotation		-	0/90	0/90	-
Version VZ max. strips width	mm	650	-	-	-
Inverter Assisted U Axis Motor Power	kw	-	0,55	0,55	0,55
Bridge up and down movement axis motor power	kw	5,5	5,5	5,5	5,5
Version VZ disks diameter	mm	1000/1700	-	-	-
Disks stack	mm	1010	1420	1800	1420
Vertical disks diameter	mm	1000/1300	1000/1300	1000/1300	1000/1300
1.5 bar min. pressure cooling water	L/min	1100	1500	1800	1500
6 bar min. Pressure Compressed Air	NL/min	50	50	50	50
Inverter Assisted V Axis Motor Power	kw	3	3	3	3
Machine front dimension	mm	11000	12000	12000	14500
Trolley movement axis motor power	kw	4	4	4	4
Version VK max. strips width	mm	-	610	-	610
Machine heigth	mm	6200	6200	6200	6200
Max. block width	mm	5000	according to lay out	according to lay out	4300
Max. block length	mm	3500	3500	3500	3500
Installed power	kw	144/214	250	337	276
Automatic unloading units approx. mass	kg	5600	5600	5600	5600
Suckers Pad Dimensions	mm	1500 x 200	1540 x 220	1540 x 220	1500 x 220
Max. vertical disks quantity	nr	56	80	100	80
Max. Load Capacity	Kg	250	250	250	250
Max. block height	mm	2250	2250	2250	2250
Inverter Assisted W Axis Motor Power	kw	2.2	1.1	1.1	2.2
Track ways length	mm	13000	according to lay out	according to lay out	15500
Suckers Pad Side Stroke(U axis)	mm	-	3400	3400	3700