M702-M705 - Single and double disc automatic cross cutting machines

Automatic cycle machines equipped with one or two diamond discs for the elimination of the heads and tails of marble or granite strips or for the production of ends trimmed strips with predetermined modular length. They are used in high production finishing lines.
The cycle, controlled by PLC, is performed first with the cutting of the strip and then, after its removal, with the positioning of the next strip.
Automatic machines for the cross cutting of marble and granite strips by means of diamond discs.
The automatic cross cutting machines M702 and M705 have been designed for the head and tail cut of strips for the continuous cycle processing.
The orthogonal cuts are performed close to the two irregular parts of the strip to allow their subsequent elimination.
M702 and M705 complete automation avoids the need of the manual intervention by the operator.
The PLC controlled program allows to get also intermediate cuts for the production of finished elements by exploiting the whole strip length.

Parameters	Unit	M702MV Marble	M702GV Granite	M705GV Marble/Granite
Max. working strip thickness	mm	50	50	50
Compressed air requirement	NL/min	25	25	50
Water requirement for each spindle	L/min	15	15	30
Bridge advancement speed	m/min	1,5 ÷ 12	1,5 ÷ 12	1,2 ÷ 10
Compressed air minimum pressure	bar	6	6	6
Disc-holder head motor power	kw	5.5	7.5	11
Infeed roller bench motor power	kw	-	-	0,75
Discs diameter	mm	350	350	350
Cooling Water minimum pressure	bar	1,5	1,5	1,5
Machine width (W)	mm	2100	2100	2240
Max. strip length	mm	3500	3500	3500
Conveyor system control motor power	kw	1,1	1,1	1,1
Number of disc-holder heads	nr	1	1	2
Machine length (L)	mm	4100	4100	5400
Machine height (H)	mm	1950	1950	2380
Installed electrical power	kw	7	9	24,5
Main conveyor belt speed	m/min	3 ÷ 23	3 ÷ 23	3 ÷ 23
Approximate weight	Kg	3300	3300	6000
Max.Strip Machinable width	mm	650	650	650