Comandulli S.U.P. Large-sized electronic bridge sawing machine for cutting stone material

Large-sized electronic bridge sawing machine for cutting stone material.
Simple, versatile, strong.
Very strong and stiff iron casting structure with double beam, mechanically worked by using high quality and precision systems.
Spindle sliding on an assembly of iron casting guides and special frictionless pads in oil bath.
Features
THE UNIQUE FEATURES OF COMANDULLI S.U.P. MACHINE
Spindle sliding kinematical motion through a timing belt system with variable speed.
Bridge traverse on special steel guides with ball rollers in oil bath.
Bridge traverse kinematical motion through a pinion/rack system in oil bath with variable speed.
Spindle axis assembled on bearings in oil bath driven by an electric motor through V-belts.
Spindle lifting on round guide with screw kinematical motion with variable speed.
Turntable on a special ball-bearing pivot block, particularly sensitive, with a full load too.
Machine with fast movements and soft at the same time, and particularly silent.
The machine is supplied with water system with solenoid valve and flow-indicator, which stops the machine automatically in case of water lack.
Electrical board at floor level and hanging push- button control panel.
Linear laser for material alignment.
OPTIONS
There is always enough room for some further desires.
Inverter for spindle speed regulation.
Bench electrical feed.
Bench support structure from carpentry.
Reference square on the bench for piece alignment.
Electronic equipment for profiled shapes with possibility of profiles drawing directly on the control panel screen.

Parameters	Unit	S.U.P. 150	S.U.P. 220	S.U.P. 260	S.U.P. 300
Max. distance between disc and column edge	mm	1000	1000	1000	1000
Bench feed motor power (option)	kw	0.75	0.75	0.75	0.75
Guides length	mm	4000	5500	6700	7200
Disc motor power	kw	11	11	11	11
Machine height (H)	mm	2100	2100	2100	2100
Spindle transversal stroke	mm	750	750	750	750
Approximate weight	Kg	1600	1840	2000	2220
Bench width with brackets	mm	1500	1500	1500	1500
Vertical axis motor power	kw	0.55 / 0.75	0.55 / 0.75	0.55 / 0.75	0.55 / 0.75
Bench width	mm	800	800	800	800
Discs diameter	mm	600	600	600	600
Discs number	nr	1	1	1	1
Installed electrical power	kw	13	13	13	13
Disc shaft diameter	mm	50	50	50	50
Machine length (L)	mm	4000	5500	6700	7200
Machine width (W)	mm	2300	2300	2300	2300
Bench length	mm	1500	2200	2600	3000
Spindle vertical stroke	mm	450	450	450	450
Bench stroke	mm	2000	2900	3300	3700
Horizontal axis motor power	kw	0.37	0.37	0.37	0.37