Quarry Machines for Stone cutting, Cutting discs for Marbel & Granite, Manlifting machines, Dust Fighters, Tower lights, Jib Cranes, Tower cranes and Hoist machines.
Stone Quarry MachinesQuarry Wire Saw Machine
€110000-125000
1 Saudi Arabia
Usage: Granite, Marble, Limestone, Quartzite
TELEDIAM TDI 100 SUPER 1
The TDI 100 Super is part of our family of new machines, and is a:
HIGH POWER DIAMOND WIRE MACHINE with VARIABLE WIRE SPEED for all QUARRY CUTTING under FULL REMOTE CONTROL.
FEATURES:
Main Flywheel: two part cast aluminium, Ø 100 cm, with high strength and resilience to absorb all shock during start-up and operation. Fitted directly to the main motor shaft for maximum power efficiency.
Main motor: rating 75 kW, 10 poles provide with temperature detector and protection against overheating. An Inverter fitted directly on the machine allows wire speeds from 0 to 40 m/s. Variation of the wire speed allows any type of stone to be cut and optimises the performance of the machine and of the diamond wire. Easy starting from low speed, with low current in- rush.
Motor-Flywheel assembly (cutting head): rotates 360° and shifts laterally by 50 cm, allowing parallel cuts to be made at 100 to 210 cm, without moving the machine, by turning the head.
Cutting Head adjustment: remote control from the control panel using built-in electric drives.
Wire Guide-Wheels: two guide-wheels Ø 38 cm are provided and can be adjusted in position to guide the wire for any cutting direction and allow safe wire start-up.
Track: two double rail tracks are included, length 300 cm each - 6 m total lenght, with quick couplings for rapid track- laying. During cutting the machine drive pinion acts on the central rack, with a positive connection system that allows safe operation even on slopes
Machine Drive: a three phase motor, with a frequency control and feedback system, drives the machine at high speed (125 cm/min) during positioning and at low speed (30 to 150 cm/h) during cutting. During automatic cutting, the speed is controlled as a function of the parameters set by the operator and of the load on the main motor. This patented Pellegrini system allows continuous movement of the machine and constant work-load on the wire, completely avoiding all jerks and overloads, and ensuring both wire life and the best possible machine and wire performance.
Digital display of machine shift speed.
Control System: all electronic control cards and power systems are fitted in the machine itself, on rubber mountings, and are electrically protected to Class 4 level (the best). Panels are sealed against dust and water to level IP65. Auxiliary supply includes a transformer to reduce spikes. Operator control is from a remote panel to allow safe machine operation, the panel carrying both an ammeter, a wire speed indicator, and a machine back-feed speed indicator as well as a complete set of push-buttons and potentiometers controlling all functions.
Safety systems: include automatic machine stop in case of wire breakage, fuses and overload relays for all motors, emergency stops on machine and control panel, electronic overload control for the main motor and the wire.
· Standard supply: 400V, 3 phase, 50 Hz. Other voltages available on request. |
· Overall machine rating: 80 kW |
· Machine weight: 2700 kg |
· Machine packing volume: 9 m³ |
· Machine size: W 150 cm x H 150 cm x L 225 cm |
Track size: 300 x 120 cm (2 pcs included, total length: 6 m) |
OPTIONS/ACCESSORIES for TDI 100 SUPER |
Supplementary rail 3 mt. long |
Couple of diam. 385 mm pulley "bicycle" |
Kit for horizontal cut composed of one “cavalletto” and one flywheel diam. 385 mm on orientable support |
Rubber ring for flywheel diam. 1000 |
Resin rings d. 385 mm |
Parameters | Unit | TDI 100 S | TDI 25 |
---|---|---|---|
Wire Saw Speed | m/s | 0-40 mt/ sec | 0-40 mt/ sec |
Max. cutting width | m | 100-2110 cm | 70-80 cm |
Main Pulley Revolutions | r/min | to be calculated starting from wire speed and pulley diameter | to be calculated starting from wire speed and pulley diameter |
Main Motor Power | kw | 75kw | 15 kw |
Feed Motors Power | kw | 0,5 Kw | 0,5 Kw |
Guide Pulley Diameter | mm | 385 | 300 |
Total Weight | Kg | 3000 | 450 |
Cutting Efficiency | m2/h | - | - |
Adjustment Distance | mm | 100 - 210 cm | 70-80 cm |
Water requirement | L/min | 30-50 L/ min | 20-30 l/ min |
Main Flywheel Diameter | mm | 1000 | 600 |
Cutting Distance | m | Depends on the cut | Depends on the cut |
Power Supply | V/Hz | 400V/ 50Hz or 60 HS | 400 v - 50Hz or 60 Hz |
Feeding Speed/Fixed Speed | m/s | - | - |
Motor Flywheel Unit Rotation | ° | to be calculated starting from wire speed and pulley diameter | to be calculated starting from wire speed and pulley diameter |
Power of Hydraulic Unit Motor | kw | - | - |
Dimension LxWxH | m | 3.08x1.8x1.75 | 1.05x0.8x0.95 |
Max. Wire Length | m | Depend on the cut | Depends on the cut |
Length of rails | m | 3 mtr each | 2.5 mtr each |
Lead Time: Immediately
Warranty: 9 Months
Install and Guarantee:Customer pay for installation, Remote guidance installation, Third-party team installation
Maintenance: Remote troubleshooting, Field troubleshooting
Quarry Machines for Stone cutting, Cutting discs for Marbel & Granite, Manlifting machines, Dust Fighters, Tower lights, Jib Cranes, Tower cranes and Hoist machines.