Som-maK 10 + 2 Heads Edge Polishing Chamfering Machine

Our Marble Granite Chamfering Machine provides Serial Standard production.
Easy to operate and maintain and Use
The feature of our machine is that it chamfering from the bottom.
The polished part of the marble is put on the band as Next.
Our Face Polishing Machine is fully automatic
Belt movement is electronically speed controlled.
Our machine is produced as 6 + 2 8 + 2 10 + 2 12 + 2 14 + 2 standard according to the Granite and Marble Type.
The engine part of our machine is completely free of water and protected from water with inner and outer protective enclosures.
Back of Abrasive Seals protecting head bearings are heat and abrasion resistant Felts.
All heads on the machine work independently from each other.
If desired, heads can be disabled according to the process.
The polishing heads come and go automatically with the entrance of the stone and automatically close and go back when the stone leaves the swishh.
There are 1 caliber, 5 bottom chamfer, 6 face chamfer, 1 deburring and 1 dropper saw on our 12 + 2 machine.
Our machine PROCESSES a maximum of 1500 mm with a minimum 70/80 mm lower support Jib Mechanism.
The Bandwidth of our machine is 450.
Our machine is Front Control Panel Controlled.
Protection Panels for Lubrication Channels Abrasive Replacement Fully Open and Close with Shock Absorber Support.
Herringbone diamonds can be integrated into our machine according to special requests.

Parameters	Unit	10 + 2 Heads
Min. processing width	mm	70
Bevelling /Chamfering spindle power	kw	1.5
Machine overall length	mm	7100
Top Press Motor Power	kw	0.75
Belt advancement speed	cm/min	0 - 350
No. calibrating/shaping/cutting spindles	nr	1
Diameter of the drip board saw blade	mm	250
Number of Bevelling/chamfering spindles	nr	4
Min. Cooling water pressure	bar	1-3
Total power	kw	21
Machine overall height	mm	2100
Machine overall width	mm	1700
Number of dressing/polishing spindles	nr	5
Extending Table Width	mm	1400
Power of the disk for drip groove execution	kw	2.2
Dressing/polishing spindle power	kw	1.5
Belt advancement power	kw	1.5
Max. processing thickness	mm	40
Calibrating/shaping/cutting spindle power	kw	2.2
Min. processing thickness	mm	10
Grinding spindle power	kw	1.5
Water consumption	L/min	32