Som-maK 12 Head Marble Granite Chamfering Machine

12 HEAD CHAMFER
Our Marble Granite Chamfering Machine provides Serial Standard production.
Easy to operate and maintain and Use
The feature of our machine is that it chamfering from the bottom.
The polished part of the marble is put on the band as Next.
Our Face Polishing Machine is fully automatic
Belt movement is electronically speed controlled.
Our machine is produced as 6 + 2 8 + 2 10 + 2 12 + 2 14 + 2 standard according to the Granite and Marble Type.
The engine part of our machine is completely free of water and protected from water with inner and outer protective enclosures.
Back of Abrasive Seals protecting head bearings are heat and abrasion resistant Felts.
All heads on the machine work independently from each other.
If desired, heads can be disabled according to the process.
The polishing heads come and go automatically with the entrance of the stone and automatically close and go back when the stone leaves the swishh.
There are 1 caliber, 5 bottom chamfer, 6 face chamfer, 1 deburring and 1 dropper saw on our 12 + 2 machine.
Our machine PROCESSES a maximum of 1500 mm with a minimum 70/80 mm lower support Jib Mechanism.
The Bandwidth of our machine is 450mm.
Our machine is Front Control Panel Controlled.
Protection Panels for Lubrication Channels Abrasive Replacement Fully Open and Close with Shock Absorber Support.
Herringbone diamonds can be integrated into our machine according to special requests.

Parameters	Unit	Som-maK 12 Head
Max. working thickness	mm	40
Dropper Saw Motor Power	kw	1.5
Water Consumption	L/min	32
Conveyor belt feed speed	cm/min	0 - 350
Pneumatic Air Pressure	bar	1-3
Machine overall length	mm	7100
Machine overall width	mm	1700
Number of spindle	nr	12
Extending Table Width	mm	1400
Machine overall height	mm	2100
Top Press Motor Power	kw	0.75
Conveyor belt width	mm	450
Chamfer Caliber Motor Power	kw	2.2
Total power	kw	21
Min. Working Width	mm	70
Min. working thickness	mm	10
Saw Disc Diameter	mm	250
Crispy Burr Chamfer Motor Power	kw	1.5
Conveyor belt motor power	kw	1.5
Chamfer Polishing Motor Power	kw	1.5x4
Spindle motor power	kw	1.5x5