T558 Multipurpose Flat Polisher, Profiler, Bush-hammering, Calibrating for Countertops, Gravestones

A multipurpose machine
More than only a flat polisher, the T558 can perform various operations like bushhammering, calibrating with satellites head, or texturing works using the know-how THIBAUT has developed for many years.
The T558 can be used to work concrete: flat, concave or convex surfaces. The runway length is adjustable according to your needs and your workshop area.
An extremely sturdy machine
THIBAUT used all its know-how for the conception of this machine, as well as its knowledge of polishing techniques. The result is an extremely sturdy machine, with a bridge and a vertical carriage in cast iron put on a runway using real train rails (Very High-Speed Train), carefully calibrated. Choosing a T558 flat polisher is choosing the sturdiest machine of its category, able to achieve an excellent polishing quality, and for a long time.
A complete working autonomy
With its tool magazine, the T558 changes automatically of milling and polishing heads and can realise operations after operations completely automatically. It could be milling, polishing, plastering, edges polishing..., all these operations can be made without intervention nor stoppages. Concaves or convexes panels can be polished too, thanks to specific equipment.
Easy programming
The T558 is very easy to program and use, thanks to a friendly interface. The machine is delivered with built-in parameters, that are adjusted during the commissioning. Optional, the program for irregular shapes gives you the possibility to take into account the real shape of the pieces to work on, and so to save a lot of time (the head does not work on a basic rectangular shape but follows the real piece shape). Optional too, you can program the position and the size of eventual openings (in case of concrete panels).
https://www.thibaut.fr/en/machine-t558-flat-polishers-architectural-concrete-other-industries-other-materials/

Parameters	Unit	T558
Main motor power	kw	30
Total power	kw	40
Z axis travel	mm	300
Water consumption	L/min	30 ( mini 2 bars)
Machine overall height	mm	3500
Air consumption	m3/h	14 ( 6 bar)
Number of dressing/polishing spindles	nr	28
Machine overall width	mm	2970
Machine overall length	mm	7020
Y axis travel	mm	4400
Number of Bevelling/chamfering spindles	nr	28