HS1-MX Single Disc Automatic or Manual Cross Cutting Machine

Single disc cutter to perform simple and easy cutting jobs, on slabs, steps, baseboards or curbs, in marble, granite, quartz or porcelain.
The surface that supports the piece to be cut is composed of idle nylon rollers to move the material easily. Mechanical stops always keep the piece tailored and aligned to obtain a square cut with precision.
Equipped with a motor that transmits to the shaft by belts. In this way, the revolutions of the disc can be varied, depending on the material to be cut.
It automatically reduces the feedrate of the head in the terminal phase of the cut to avoid material breakage. Making the return of the head quickly and automatically reducing cutting times.

Parameters	Unit	HS1-MX	HS1-M / 350	HS1-M / 400	HS1-M / 500	HS1-M / 625
Machine width (W)	mm	1800	2150	2150	2300	2300
Installed electrical power	kw	8.5	8.5	10	12	16
Disc motor power	kw	7.5	7.5	9.2	11	15
Approximate weight	Kg	1300	1200	1250	1400	1500
Machine length (L)	mm	3500	3500	3500	3500	3500
Cooling water (minimum pressure 1.5 bar)	L/min	20	20	20	20	20
Maximum workable thickness	mm	100	75	100	150	200
Discs diameter	mm	350/400	350	400	500	625
Type of Table		Idle Rollers	Idle Rollers	Idle Rollers	Idle Rollers	Idle Rollers
Air Consumption	L/min	15	15	15	15	15
Maximum cutting width	mm	610	610	610	610	610
Machine height (H)	mm	1800	1800	1800	1900	1900