Ideal 600 Bridge Saw Monoblock Bridge Cutting Machine

Ideal600 Monoblock Bridge Saw. Machine with head rotation from 0º to 90º, to cut marble, granite, quartz and porcelain slabs. Ref. 8902
Bridge Saw Monoblock Ideal600
Ref. 8902 Technical characteristics:
One-piece self-supporting steel structure.
The structure does not need a foundation and is completely fixed to the ground.
Structure accompanied by tilting bench with wood and rubber surface.
Technical characteristics:
-Maximum cutting length (X axis): 3300mm
-Maximum cutting width (Y axis): 2000mm
-Max cutting thickness (Z axis): 150mm
-Max thickness cut to miter cut: 60mm
-Diameter of disc: minimum 400mm – maximum 600mm
-Max. Miter cut disc diameter: 400mm
-Diameter of disc shaft: 50mm
-Degrees of horizontal rotation of the head: Fixed positions of 0º / 90 °. This head does not interpolate.
-Table dimensions: 3200 × 2000 mm
-Tilt Table Tilt: 85 ° (Approx.)
-Manual table rotation 360 ° with locking of all positions
-Disk motor power: 15Kw
-Motor power (X axis): 2.2 Kw
-Motor power (Y axis): 1.5 Kw
-Power of the up / down motor (Z axis): 0.75 Kw
-Oil pump power 3Kw
-Total power: 23Kw
-Speed ​​of rotation of the disk motor 1440 rpm
-Required air pressure: 6 bar
-Weight of the machine 6500Kg
-Machine dimensions: 5800x3400x2300mm

Parameters	Unit	Hersen Ideal 600
Dimensions of the work table(L×W)	mm	3200 × 2000
Motor power (Y axis)	kW	1.5
Bridge transversal stroke(Y axis travel)	mm	2000
Diameter of disc shaft	mm	50
Horizontal stroke(X axis travel)	mm	3300
Oil pump power	kW	3
C axis blade rotation	°	0º / 90 °
Manual table rotation	°	360 °
Head raising/lowering stroke(Z axis travel)	mm	150
Machine height	mm	2300
Disc diameter	mm	min. 400 – max. 600
Disc motor power	kw	15
Max. revolutions of the spindle unit	r/min	1440
Approximate weight without table	Kg	6500
Installed electrical power	kw	23
Required air pressure	bar	6
Machine width	mm	3400
Tools holder head inclination(A axis blade rotation)	°	360 °
Tilt Table Tilt	°	85 ° (Approx.)
Max. workable thickness	mm	60
Power of the up / down motor (Z axis)	kW	0.75
Machine length	mm	5800
Motor power (X axis)	kW	2.2