4000*2000mm profect waterjet laser message marble cutting machine
Stone Factory MachinesStone Finishing, Profiling MachinesWaterjet Machines
$40000-60000
WAMIT
China
Usage: Granite, Marble, Limestone, Slate, Onyx, Artificial Stone, Basalt, Quartzite, Sandstone, Travertine
Machinery Function Features
1.37KW SIEMENS motor
2.All electric components are Schneider brand
3.Can do special size and special design according to customer’s demand
4.Free abrasive sand feeding system
5.We have most convenient automatic abrasive sand removing and recycling system for any brand water jet cutting machine
6.Imported intensifier pump
7.Use 8mm steel to make the cutting table stronger and keep the precision time for whole life
8.Soft cover for linear guider or gear and rack, can effectively prevent dust
9.Install an automatic oil tank for cutting table , no need maintenance of linear guider
10.Legitimate WINDOWS 7 system and install the Chinese newest water jet cutting system
Software
Dedicated water jet cutting software with graphic simulation running function, graphic input automatic programming function. • Support for DXF files. • Support forward and reverse processing functions. • Uniform speed control function. • Two modes of segmentation and smooth machining. • Automatic processing with small arc speed. • Coordinate recovery function after power off. • Double lift speed parameter function. • With cycle processing. • Convenient pause to continue and start machining in any segment. • Free time delay setting. • Apply SIEMENS PLC instead of relay, buttons are Schneider.
Working Example
ADVANTAGES:
1. we promise 2 years( 2000 hours) warranty always. and have got CE certificate
2. we use flow type ECL cutting head, the cutting efficiency is at least 10% higher.
3. the abrasive sand hopper beside the cutting head is also FLOW design.
4. we have new technology that can make the machine moving speed is to 30m/min. normal speed is 6m/min as you see. if this
technology used in pure water cutting, the cutting cost will reduce 50%. if using other materials cutting like glass , marble,
steel, the cutting cost will also 20-30% reduced. but of course , the machine with this function price will be a little higher.
5. we use soft cover of the linear guider, can prevent dust away from the linear guider, so keep the linear guider keep precision
longer.
6. we assemble an auto oil feeding to linear guider, so customer needn't maintenance the linear guider always.
7. seperated body.
8. we will send a remote control pendent.
9. we have the world most convenient abrasive sand removing system. it can be used for any brand water jet cutting machine, maybe
you can promote this system in your country and other countries. please check the attachment.
11. we supply 420mpa pump with 37KW motor, but the price of the whole machine is very competitive now
12. we use variable pump, so can reduce electricity cost for customers.
13. we can do 220V and 415v also.
14. like height tracking system, positioning system , we can also provide.
15. all our components are SCHNEIDER brand
16. the motor and PLC are SIEMENS brand.
17. we can provide AB 5 axis with 10 degree and AC 3D 5 axis with 60 degree.
18. use 10mm steel for water tank supporter and use 8mm steel for beam, keep the machine working more stable.
19. use JAPAN YASKAWA servo motor.
20. imported TAIWAN HIWIN ball screw and linear guider
21. imported America intensifier and TAIWAN accumulator and high pressure assembly and low pressure assembly. if you have special
requests, we can also do.
22. we can provide 80Kpsi and 90KPSI intensifier pump and 60KPSI direct drive pump.
23. can make Touch screen
24. automatic calibration gantry perpendicularity
Can nearly cut all material:
Alloy Steel
Aluminum
Armor Plate
Brass
Boron
Bronze
Cast Iron
Cobalt
Copper
Exotic Alloys
Hastalloy
Hardened Steel
Hot Rolled Steel
Inconel
Kevlar
Magnesium
Mild Steel
Nickel AlloysStainless Steel
Steel Alloy
Steel Hardened
Steel Hard Rolled
Steel Mild
Steel Tool
Tantalum
Tin
Titanium
Tungsten
Wrought Iron
Zinc
Acrylics
Ceramics
Composites
Foam
Fiberglass
Kevlar
Mylar Laminates
Nylon
Plastics
Plexiglass
Porcelain
PVC
Rubber
Thermoplastics
Teflon
Urethane
Vinyl
Armor Plate
Bullet Proof Glass
Glass,Mirror Glass
Ceramic Tile
Granite
Limestone
Marble
Porcelain
Terrazzo
Hardwood
More advantages
1. Automatic lubrication system from the Valley of Japan.2. The internal components are selected from Schneider International brand, with first-class quality and reliable work.
3. Way of drive : Servo ( drives and motors are from Japan YASKAWA ).
4. High precision, Ensure cutting results.
5. Provide customizable services.
6. After-sales Service: Field maintenance and repair service, Online support, Field installation, commissioning and training, Video technical support, Free spare parts.
HP servo direct drive pump
WAMIT servo direct drive pump represents a new generation of high-efficiency, energy-saving ultra-high pressure pump, which is the first large R&D in China. Servo motor driven direct drive intensifier system. Power is only 15kw, which can save you 60% to 70% of the cost
Model: WMT SDD 20
Maximum pressure: 60000Psi. Gemstone aperture: 0.33mm.
Displacement: 3.0 l/min.
Inlet pressure: 0.4MPa.
Main motor power: 15KW.
Dimensions: 1680*900*1100mm
Double row water filtration system (5Micron, 1micron, series)
Intelligent start and stop function.
Over-pressure automatic shutdown and under-pressure automatic protection.
Advantages of the WAMIT servo direct drive pump:
A: Energy saving: The main motor adopts a torque motor of 15KW, compared with the motor of the 37KW hydraulic high pressure intensifier system, the power consumption can be saved by 60%-70%. B: Environmental protection: the use of servo direct drive, no hydraulic system, with self-cooling function. As we all know, hydraulic The hydraulic intensifier system must be filled with 110L of anti-wear hydraulic oil to work, and the heat generated by the hydraulic oil is also cooled by the oil cooler. The direct drive pump is completely free of hydraulic oil and cooling system. C: High efficiency: Direct drive pump provides a higher pressure output ratio, cutting speed is 20 to 50% faster than the same equipment in the market. E: Low noise: almost no noise when working. F: Small weight: The total weight of the direct drive pump is less than 600kg, and the movement is flexible. The weight of the hydraulic intensifier pump is 1000kg. G: Beautiful appearance: The structure is reasonable in design and beautiful in appearance, because the direct drive pump does not have a hydraulic system, Thereby avoiding the leakage of the hydraulic oil (the hydraulic seal will be damaged for a long time use, causing the hydraulic oil to leak), eliminates the contamination of equipment by oil stains.
Adopt industrial PC
Dedicated water jet cutting software with graphic simulation running function, graphic input automatic programming function. • Support for DXF files. • Support forward and reverse processing functions. • Uniform speed control function. • Two modes of segmentation and smooth machining. • Automatic processing with small arc speed. • Coordinate recovery function after power off. • Double lift speed parameter function. • With cycle processing. • Convenient pause to continue and start machining in any segment. • Free time delay setting. • Apply SIEMENS PLC instead of relay, buttons are Schneider.
• 170 liter capacity • High-precision sensors alert operators when they need to replenish sand • Safety relief valve • Working pressure: 0.2-0.3MPa • Water separator
can use 8-10 hours.
No need electronic control, simple operation, reliable, maintenance-free. Can supply the cutting sand quantity . Need less than 0.2Mpa compressed gas pressure. Provide sand storage for the water jet cutter and automatically transfer the sand to the sand bucket. Can increase the automation of the equipment and reduce the labor intensity of the operator.3D AC 5 axis cutting head
1.The cutting resultis much better. When cuttingshaped sharp corners or continuous sharp corners, there is no obvious zero point
at the corners2.A wide range of processes. It can makecylindrical parquet, large angle chamfer and other drawing which AB
five-axis waterjet can not be completed3.High processing efficiency. The C axis rotates infinitely, and the corner speed is fast,
which improves the processing efficiency.
laser height tracking system
|
|
|
Cutting Speed of direct drive pump (mm/min)
|
Cutting Speed of 420MPa(mm/min)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shandong WAMI CNC Technology Co.,Ltd.
Shandong WAMIT CNC Technology Co., Ltd is a professional manufacturer of water jet cutting machine. We are specialized in R&D, manufacturing, sales and technical services of ultra high pressure water jet cutting systems and relative parts. We have 3 axis, 5 axis water jet cutting machine and have 60000psi, 80000psi , 90000psi intensifier pum and drect drive pump. Our water jet cutting machine is widely used in stone industry, glass industry, metal industry, composite materials(plastic, rubber, acrylic, foam), food industry and so on.
The company's products are exported to Europe, America, Africa, Asia and so on, and gradually establish a relationship from high quality, high quality, high service to trust.
Technical Data
| Parameters |
Unit |
WMT4020 |
| Machine length (L) |
mm |
4200 |
| Machine width (W) |
mm |
2200 |
| X - Y axis displacement speed |
m/min |
50 |
| Machine height (H) |
mm |
2000 |
| Main Power |
kW |
37 |
| Max. working slab thickness(marble/granite) |
mm |
200 |
| Power |
V |
220v/380v/415v |
| Dimensions of the work table |
mm |
4000x2000 |
| Approximate weight(including table) |
Kg |
4500 |
| Maximum depth of cutting |
mm |
200 |
Components
-
cnc contoller
-
intensifier pump
-
4000*2000 waterjet
-
feed
After-Sale
-
Lead Time: 30 days
-
Warranty: 24 Months
-
Install and Guarantee:Remote guidance installation, Third-party team installation
-
Maintenance: Online software upgrade, Regular guidance & maintenance, Field troubleshooting
Supplier Detail
Shandong WAMI CNC Technology Co.,Ltd.
Established: Dec 29,2000
China
Main Product:
stone cutting machine, water jet cutting machine, waterjet spare parts, 60000psi direct drive pump
![user img]( "user img")
Ms.Linda Lee
Tel:
+86-18945047060
Adr:
No. 1341, Kechuang Road, High-tech Zone, Jinan City, Shandong Province
Visit Store
Home
Stone Shop
Shopping Cart
Suppliers
Products
Stone Library
Stone Fair
Post Need
Message
Favorites
Get App
Logout
13YR
