Wheel Forklift Loaders JGM771FT32KN

Guo III electronically controlled high-pressure common rail engine, with large low-speed torque, energy-saving and environmental protection;
Single-stage, four-element, two-turbine torque converter, which reduces gears and provides reasonable traction to match gearbox and engine;
Hydraulic system with double pump commutation and priority steering has high working efficiency and low energy consumption;
Fully hydraulic coaxial flow amplified steering system, which is flexible and reliable in steering;
High-precision paper filter element is used for suction and return of hydraulic oil tank to ensure cleanliness of hydraulic system.
Use hydraulic element accessories with high standard and new technology to improve the reliability of hydraulic system;
The heat dissipation system of the whole machine has been optimized with good heat dissipation effect and is stable and reliable under severe conditions.
Finite element analysis is used for structural parts and dust-proof design is used for key articulation points to ensure good lubrication of pin shafts.
The whole machine adopts full hydraulic double-circuit caliper disc brake system with three calipers on one side of the wheel and hydraulic caliper disc brake for parking brake.The main brake elements are high-quality imported brake elements, which ensure safe and reliable braking.
The front wheel is 26.5-R25 all-steel engineering radial and the rear wheel is 26.5-R25 all-steel engineering radial;
The cab is luxuriously equipped with high-quality seats, silk ring mats and sun visors, with elastic bi-directional damping and good comfort.
Intelligent instrument system can monitor the working condition of the whole machine in real time.
Adapt to modern mining technology, which can easily pry and scrap materials, reduce labor costs and strength;
Three power modes: heavy load, medium load and light load can be selected by customers according to different operating conditions to save fuel and reduce consumption.

Parameters	Unit	JGM771FT32KN
Forward - 2 Transmission Speed	km/h	0~12
Maximum Lift Height	mm	3500
Fuel Tank Capacity	L	220
Hydraulic Tank Capacity	L	270
Wheel Base	mm	4200
Operating Weight-With Carriage and Forks	Kg	32400
Machine Length	mm	9290
Engine Gross Power	kw	178
Forward - 1 Transmission Speed	km/h	0~30.4

• 

• 
• 
• 
• 
• 

•