Stone Edge Polishing Grinding Machine For Sale

Features:
-13 heads Three pillars
-Electric adjustment motor swings from 45°to 90°arbitrarily, the electric adjustment motor moves back and forth, lifts
-The grinding wheel of this machine adopts water grinding disc, equipped with snail buckle joint, frequency conversion speed regulation, No. 1 and No. 2 flat forming motors 5.5 kW, No. 3 and No. 4 motors 4.5 kW, No. 5, 6, 7, 8, and 9 motors 3 kW (No. 3-9 motors are placed vertically, the bottom of the processing is flat and polished, and the front of the stone can be moved to process the corners, and the edge grooves are polished), the No. 10 motor is back-cut 7.5 kW (the No. 10 motor is placed at 45 degrees, and the diameter is 300 saw blades processing rock slab, stone material and other materials back cut), chamfering motor, No. 11 motor 4.5 kW, No. 12, No. 13, No. 14 motor 3 kW (No. 11-14 motor 45 degrees inclined, 45-90 degrees Arbitrary electric angle adjustment with No. 1 and No. 2 forming motors for processing 1/2 round, 21st side and other Roman edges), front chamfering of various processed stones, and various flat stones can be ground according to different sizes and thicknesses of the calibration + right Angle bottom edge, pull groove with polishing, pull groove with polishing, thickening straight edge light, straight bottom edge at 45° chamfering, small R round belt side polishing, grooving polishing, Begonus corner back cutting, saw blade without seamless back cutting, kicking line, anti-skid groove, French edge, straight edge, edge and corner forming polishing, The rough grinding, fine grinding, and polishing processes are completed at one time. The brightness after processing is higher than that of the bright cutting of the board surface. The back cut and the bottom belt are polished at one time. The structure is advanced and reasonable. The front and back of the motor can be adjusted electrically to avoid manual wheel change slow speed, many links, and complex operators, workers are unwilling to change wheels, and slow wheel changes appear. High precision, fast efficiency, easy operation, and simple maintenance. During the grinding process, the feed speed and progress can be adjusted electrically by pressing the lift switch. The maximum amount of processing is 4m/min. The normal use of the machine is equivalent to the workload of 15 persons in the normal stone processing, and the process defects caused by the workers during processing are eliminated.

PLC

Features:

-13 heads Three pillars

-Electric adjustment motor swings from 45°to 90°arbitrarily, electric adjustment motor moves back and forth, lifts

-The grinding wheel of this machine adopts water grinding disc, equipped with snail buckle joint, frequency conversion speed regulation, No. 1 and No. 2 flat forming motors 5.5 kW, No. 3 and No. 4 motors 4.5 kW, No. 5, 6, 7, 8, and 9 motors 3 kW (No. 3-9 motors are placed vertically, the bottom of the processing is flat and polished, and the front of the stone can be moved to process the corners, and the edge grooves are polished), the No. 10 motor is back-cut 7.5 kW (the No. 10 motor is placed at 45 degrees, and the diameter is 300 saw blades processing rock slab, stone material and other materials back cut), chamfering motor, No. 11 motor 4.5 kW, No. 12, No. 13, No. 14 motor 3 kW (No. 11-14 motor 45 degrees inclined, 45-90 degrees Arbitrary electric angle adjustment with No. 1 and No. 2 forming motors for processing 1/2 round, 21st side and other Roman edges), front chamfering of various processed stones, and various flat stones can be ground according to different sizes and thicknesses of the calibration + right Angle bottom edge, pull groove with polishing, pull groove with polishing, thickening straight edge light, straight bottom edge at 45° chamfering, small R round belt side polishing, grooving polishing, Begonus corner back cutting, saw blade without seamless back cutting, kicking line, anti-skid groove, French edge, straight edge, edge and corner forming polishing, The rough grinding, fine grinding, and polishing processes are completed at one time. The brightness after processing is higher than that of the bright cutting of the board surface. The back cut and the bottom belt are polished at one time. The structure is advanced and reasonable. The front and back of the motor can be adjusted electrically to avoid manual wheel change slow speed, many links and complex operators, workers are unwilling to change wheels, slow wheel changes appear. High precision, fast efficiency, easy operation, simple maintenance. During the grinding process, the feed speed and progress can be adjusted electrically by pressing the lift switch. The maximum amount of processing is 4m/min. The normal use of the machine is equivalent to the workload of 15 persons in the normal stone processing, and the process defects caused by the workers during processing are eliminated.

Parameters	Unit	MB132614
Overall machine height	4	2000
Overall machine width	4	1400
Machine weight	26	5500
Installed electrical power	7	50
Overall machine length	4	7800

• 

  GRANITE

• 

  PLC

• 

  PLC