13 Heads Edge Grinding Straight Line Polishing Processing

The machine has variable frequency speed regulation, automatic refueling, and maintenance, digital display after abrasive loss, which is convenient for operators to make electric compensation. 4.5kW, No. 5, 6, 7, 8, 9 motors 3kW (No. 3-9 motors stand upright, the bottom is flat and polished, the front side of the movable stone is processed with a corner line, and the edge groove is polished), the back of the No. 10 motor Cutting 7.5 kW (No. 10 motor is placed at an angle of 45 degrees, with a 300-diameter saw blade for processing slate, stone and other materials for back-cutting on the reverse side), chamfering motor, No. 11 motor 4.5 kW, No. 12, No. 13, No. 14 motor 3 kW (No. 11-14 motors are placed at an angle of 45 degrees, and the angle can be adjusted at any electric angle of 45-90 degrees to match No. 1, No. 2 forming motors to process 1/2 circle, No. 21 sides and other Roman edges), all kinds of processed stone Front chamfering, can grind the fixed thickness + right-angle bottom edge of various flat stones according to different sizes and thicknesses of the stone, the middle groove is polished, the edge groove is polished, the thickened straight edge is exposed to light, and the straight bottom edge is inverted at 45°C Corner, small R round belt side polishing, slot polishing, begonia angle back cut, saw blade seamless without back cutting, skirting line, anti-slip groove, French edge, straight edge, angular edge, etc. Shaped and polished, rough grinding, The fine grinding and polishing processes are completed at one time, the brightness after processing is higher than the bright cutting of the board surface, and the back cutting and bottom belt polishing are completed at one time. The structure is advanced and reasonable, and the front and rear of the motor can be electrically adjusted to move up and down to avoid manual wheel changes to adjust the speed. Slow, many links and complex operation workers are unwilling to change the wheel, the situation of slow wheel change occurs, high precision, fast efficiency, convenient operation, simple maintenance, during the grinding process, the feeding speed and the amount of progress can be adjusted electrically by the lift switch, the maximum processing 4m/min, the normal use of machinery is equivalent to the normal stone processing workload of 15 people, and to eliminate the process defects produced by workers during processing.

Parameters	Unit	DFY-LM11641
Min. processing thickness	mm	10
Max. diameter of shaping wheel	mm	120
Sound pressure level	dB	50
Belt advancement speed	mm/min	1-4 m/min
Machine overall width	mm	1400
Number of dressing/polishing spindles	nr	6
Approx. Weight	Kg	5500
Machine overall length	mm	7800
Grinding spindle power	kw	4.5
No. calibrating/shaping/cutting spindles	nr	9
Max. processing thickness	mm	80
Standard diameter of polishing wheels	mm	120
Main motor power	kw	45
Standard diameter of chamfering wheels	mm	120
Worktop height	mm	2000
Min. processing width	mm	10
Machine overall height	mm	2000
Calibrating/shaping/cutting spindle power	kw	7.5
Max. processing width	mm	80
Grinding tool diameter	mm	120
Number of Bevelling/chamfering spindles	nr	4
Total power	kw	50

• 

• 

  Payment required

• 

  resin wheel

  polishing material