Filter Press Water Treatment Equipment

1, Filter plates are made of strengthened polypropylene through mold pressing, high in strength, light in weight, corrosion resisted, non-poisonous and odorless.
2, Programmed arm tie, electrical system controlled, hydraulic system controlled or computer controlled, completely automatic.
3, Hydraulic devices are adopted for pressing and releasing filter plates with maximum pressing pressure of 25 Mpa, and automatic pressure maintaining by using electro connecting pressure gauge.
4, The maximum filtering pressure is 1.5 Mpa to ensure optimum conditions of cake formation and pressure filtration.
5,Simple in operation, safe and labor saving, use buttons on the control panel to control continuous actions, and safe in operation with multiple safety devices.

PLC control with Omron software

The liquid passes through the filter cloths on each chamber and is discharged through the filtrate discharge system. The filter medium retains suspended solid particulate. Solids content and remaining water build a cake on the surface of the filter cloth. The slurry is continuously fed under pressure to all chambers. This process continues until cake is compressed to maximum solids concentration. The pump is then shut off; hydraulic pressure is released, and follower plate is retracted. Plates are then separated and cake discharges by gravity into cake disposal container.

Parameters	Unit	XMK20/800-UB
No. of plates	pcs	21
Height	mm	1500
Mud capacity	m3/h	20
Length	mm	3600
Noise lavel	dB	55
Air pressure required	bar	6
Power	kw	4
Filter capacity	L/min	180
Weight	Kg	2600
Air supply required	m3/min	1
Width	mm	1100

• 

  All natureal and artificial stones water

• 

  Filter plate

• 

  Filter cloth