Breton FUEGO 4X - 4-axis diamond wire shaping machine

FUEGO 4X reflects the innovative and technological spirit of Breton.



It is a machine suitable for block shaping and slab/small blocks cutting, capable of interpolating 4 axes.



It is usually equipped with a motorized block-holding trolley with brushless motor and loading platform; it enables to execute profiles such as columns, frames and shapes for funerary art and interior decoration, by interpolating the vertical cutting axis with the trolley advance horizontal axis.



Designed on the basis of the single-wire machine "FUEGO Multiaxis", it is equipped with special wire-driving drums which can be oriented adjacent to the entrance and exit of the wire from the block in order to follow the cutting direction.



It is equipped with special drives for axis positioning and with a powerful, user-friendly, CAD/CAM programming software to be installed on the customer’s computer.



Breton Fuego 4X represents the quintessential innovative and technological spirit of the company.



The machine, which can interpolate up to 4 axes, is designed for shaping and dimension sawing of large and small blocks by means of a diamond wire to create complex geometries.

Parameters	Unit	FUEGO 4X
Wire peripheral speed	mm/sec	10000 ÷ 40000
Min. water pressure required	bar	3
Total water requirements	l/min	40
Min. Air pressure	bar	6
Block-holding trolley travel	mm	3500
Block max. height	mm	1800
Block length	mm	2000
Total installed power	kW	30
Speed of wire lifting/lowering	mm/h	50 ÷ 10000
Approximative Weight	kg	7000
Wire actuating motor power	kW	18.5
Block-holding trolley dimensions	mm	1500 x 2000
Overall widht	mm	7000
Block max. widht	mm	3000
Diameter of new diamond wire	mm	7.3 or 8.7
Compressed air requirements	l/min	400
Block max. weight	kg	30000
Overall height	mm	7000
Diamond wire length	mm	18000
Overall dimensions (without perimeter fencing) lenght	mm	9000

• 

  Limestone Cutting Bench