Easyedge V7S Vertical Edge Polisher-Breton Spa

EASYEDGE V7S - VERTICAL EDGE POLISHER WITH OSCILLATING MOTION OF THE SPINDLES

Easyedge V7 is specially designed to polish straight, flat edges and to perform the upper and lower chamfers on natural and compound stone panels placed upright. The polishing spindle unit is designed with oscillating motion in order to guarantee the maximum polishing degree, independently of thickness.

At the entry, the machine is equipped with a spindle which performs the profile-shaping of the edges, or the gauging of the piece lower part, or the “drip board cut”. Because of its simple design, the Easyedge V7, which is delivere completely assembled, can be rapidly installed and started, even without the intervention of the Manufaturer’s skilled technicians. It can be floor-anchored and does not require any foundations.

The processing water is collected inside the machine and then conveyed to the point of discharge. The Easyedge V7 can polish materials up to 60 mm thick: the simple manual adjustment of the lateral presser bar according to the thickness of the piece to be worked is sufficient.

The standard machine is supplied fully equipped with:

- 1 spindle to perform the edge profile-shaping, or the thickness gauging, or the “drip board” carving.

- 7 spindles to polish the straight edge.

- 2 spindles to perform the standard chamfers.

- 1 spindle (+1 optional) to carry out deep edge bevelling.

MAIN CHARACTERISTICS

- electromechanical control of the machine without any sophisticated electronic device, in order to facilitate maintenance and make it executable to the user himself;

- polishing spindles with pneumatic pressure, equipped with multiple-labyrinth frontal radial seals and protection bellows to secure maximum reliability when working under a jet of water;

- 2 chamfering spindles with pneumatic pressure (1+1 opposed spindles) to carry out standard chamfers;

- 1 bevelling spindle with mechanical positioning (plus 1 opposed spindle) to carry out deep edge bevelling. Bevels are then polished by the pneumatic chamfering spindles;

- oscillating movement of the polishing spindle unit to guarantee the maximum polishing degree on the straight edge, independently of thickness;

- great stability of the vertical piece under working thanks to the rigidity of the seat-guided conveyor belt;

- “Plug and Play” installation and start-up of the machine, without the intervention of the Manufaturer’s skilled technicians;

- guards to keep the processing water inside the machine thus preventing it from polluting the surrounding area;

- guards and stainless steel electrical cabinet to avoid all problems of rust;

- the machine complies with CE or UL standards;

Parameters	Unit	Easyedge V7S
Sound pressure level	dbA	83
Water consumption	m3/h	29
No. calibrating/shaping/cutting spindles	nr	1
Standard diameter of polishing wheels	mm	130÷150
Machine overall length	mm	1260
Min. processing thickness	mm	10
Max. diameter of shaping wheel	mm	200
Belt advancement speed	mm/min	400÷2000
Dressing/polishing spindle power	kW	1.5
Number of Bevelling/chamfering spindles	nr	2+1
Min. processing width	mm	50
Machine overall width	mm	4300
Max. processing thickness	mm	60
Belt advancement power	kW	0.75
Calibrating/shaping/cutting spindle power	kW	5.5
Machine overall height	mm	1330
Number of dressing/polishing spindles	nr	7
Bevelling /Chamfering spindle power	kW	1.5
Max. diameter of calibrating wheel	mm	180
Max. processing width	mm	1200
Standard diameter of chamfering wheels	mm	130
Diameter of the drip board saw blade	mm	250
Approx. Weight	Kg	2200
Min. workable length of the single piece	mm	400
Polishing spindle rotation speed	rpm	1400
Calibrating spindle rotation speed	rpm	2800