BM Super 800/420 Single Blade Machine Block Squaring,Cutting

The single blade machine is perfectly suitable for squaring marble blocks or cut big thickness slabs, installing one diamond blade. The machine is supplied with a fixed trolley for the blocks, in order to cut big thickness slabs; otherwise the machine is supplied with a rotating bench trolley, in order to square the marble blocks.

The operation of the machine is by a combined hydraulic and mechanical movements, which allows the best tensioning and movement of the blade, in order to raise the speed of cut and guarantee the best precision. On the BM Super model, the diamond blade has a linear stroke of 420 mm, on the BM Super 800 the diamond blade has a linear stroke of 800 mm.

They install the same motor, so with the same electrical consumption, the 800 mm model guarantee a higher cutting speed (downfeed) and so a bigger production.

800 mm STROKE

For greater production and lower consumption of diamond segments. It is ideal for defective and abrasive materials.Sprinkling system

The newly concivied water sprinkler ensures better distribution of the water over the sawing area.

Cooling system.

A new closed circuit cooling system using non recycled water to increase the life of the pistons and gaskets.

Automatic cutting programmer displayed on touchscreen, controlled by PLC.

Reasons for choosing BM SUPER over a monofil for sawing marble:

•Minor sawing costs as diamond blades are cheaper than diamond wires.

• Higher output – in square metres – with the diamond blade than with the diamond wire.

• Greater cutting precision.

• Optimal sawing speed to quality ratio.

• Less waste of material when squaring blocks.

• An extra 6 mm for every cut because diamond blades are thinner.

• Smaller investment costs of the machine.

• Inferior sawing time on blocks with small dimensions.

Parameters	Unit	BM Super 800	BM Super 420
Distance between two pillars	mm	9445	7950
Fast Lowering Rapide Motor Power	kW	3.5	3.5
Working Lowering Speed		0÷2.000	0÷2.000
Useful Cutting Width	mm	3500	3500
Length of Blade	mm	4480	4100
Useful Cutting Height	mm	2200	2000
Overall Height	mm	6000	6000
Weight of the frame	Tons	8	4
Main Motor Power	kW	30	30
Strokes of the blade	mm	800	420
Cycles per minute/Flywheel speed	r/min	100	160
Overall Length	mm	6000	6000
Overall Width	mm	8600	7700
Dimention Of trolley LxW	mm	3000x2300	3000x2300