LGR1 Quarry Diamond Wire Saw Machine

The LGR 1 machine was build for execution of little diamond wire cutting on marble, stones, etc., but also in order to solve problems in building and artistic processing. The effectiveness of LGR 1 machine is confirmed by the extreme ease of working and the processing and cutting speed of the diamond wire. Thanks to this system the operations can be carried out without dust, noise and vibration, being able to perform cutting of any thickness, size and slant on stones like squaring or preparatory bevelled cut of monuments, but also on reinforced concrete, like demolition of base, walls, pillars, stairs, bridges and roads.

The possibility of disassembling the machine into three parts as well as its lightness make the transport easy into small yards and those which are difficult to access. Thanks to its characteristics LGR 1 machine allows to execute operations with diamond wire with the best conditions; in fact it can also carry out several cutting edges with different sloping degrees thanks to a total rotation (360°) of the engine flywheel unit and thanks to the manual slide which allows to obtain a perfect alignment between the machine flywheel and the cutting edge.

The electronic control system allows the best use of the machine and of the diamond tool according to the characteristics of cutting. Lochtmans’ diamond wire cutting machines are equipped with accident prevention system in order to avoid risks for workers who operate or work near the machine, because the breaking of diamond wire can create projection of circuit elements (matchboards, spacers, springs or parts of cable) and the consequent whip action of the cable.

LGR 1 machine is equipped with a very practical and functional protection system. Thanks to the protection racket and to a simple movement, it can be possible to set the fillet protection device in any positions of the flywheel engine. The protection device is extensible and it can reach all the open path of diamond wire, also when the machine is in motion. While the machine is moving the screen belt lets off covering the area where the diamond wire goes open, being an effective element of protection.

Parameters	Unit	LGR1
Max. distance between 2 vertical cutting	mm	840
Side stroke positioning	mm	200
Dimension LxWxH	mm	1100x650x700
Main Flywheel Diameter	mm	400
Total Weight	Kg	130
Motor Flywheel Unit Rotation	°	360
Power Supply	V/Hz	380
Feed Motors Power	kw	7.5
Remote control board weight	Kg	31