2014 Brazed Diamond Profile Wheel and Grinding Wheels

Vacuum brazed diamond tools is characterized in its high sharpness, fine grinding efficiency, long working life, low cost.Brazed hand profile wheel is for shaping the edge or curve line for various granite and marble on manual type profiling machines, with special diamond brazing technology, diamond is firmly brazed onto the center, which makes it is cutting effciency higher, working life longer, cost lower and performance higher.

For shaping the edge or curve line for various granite and marble.
1):OD: 65mm 75mm 85mm 92mm;

2):Thread: M14, 5/8”-11
3):Height: 5mm, 10mm, 20 mm, 30mm, 40mm, 50mm
4:)Grit: Coarse, Medium, Fine.
5):Design: Eased, Bir’s beak, Bevel, Ogee, Full Bullnose, etc

5. All size we could make according to the customers' requesr

1, Good coherence

It owns a strongly good coherence depending on the chemical metallurgical effect happening on abrasives,brazing filler metal and matrix interface while the high temperature of brazing.And it’s enough to control the abrasive particles firmly in the advanced grinding even on heavy duty with the thickness of the brazed filler metal on 20-30 percent of the percentage of the abrasives,well,as you know,it is untouchable.

2, Better convexity of the abrasives

Usually the height of the convexity of abrasives could reached 70-80 percent,as a result,the tools would be more sharp,what’s more,the grinding force and the grinding temperature will be apparently decreased.

3, Enough place for the scraps

It’s more ample for the high convexity of the abrasives and is not easier to be blocked in grinding as to avoid the fail of the tools.

4, Less wasteness of the diamond

In the process of brazed diamond tools,except the rarely fall off of the abrasives,most of them could be utilized to the hight of 70-80 percent of itself.

5, Cutting granits,concrets,rebars,ceramics,glass,woods,plastics and so on,which is highly efficient.

6, Strong structure

It is the only one which could be safely used in the super-speed around 300-500 meters per seconds to 1000 meters per seconds.

7, Environmental friendly

It thoroughly breaks away from the blocks of serious pollution with the electroplating-made super hard abrasive tools replaced by the high-temperature brazing which riched the standard of nowadays’ Green cleaning manufacturing.