diamond cutting tools, wires, discs, diamond blades, polishing and calibrating tool
diamond cutting tools, wires, discs, diamond blades, polishing and calibrating tool
Description
The router is a small diameter grinding wheel used for limited profiling and sanding as well as for particular jobs on stony materials.
Technical Parameters
· Dimensions: Minimum diameter (bottom of the throat plate) is normally 16 mm for electroplated and 22 mm for sintered.
· Connection: ½ gas
· Types: Position 1: eletroplated (marble) / sintered (granite)
Position 2: eletroplated (marble) / sintered (granite)
For particularly hard marbles, the first electroplated position is replaced with a sintered position.
· RPM: Position 1
marble 4800-5500 rpm
granite 4800-5500 rpm
Position 2
marble 4800-5500 rpm
granite 4800-5500 rpm
· Feeding: Position 1
marble 200-400 mm/minute
granite 150-250 mm/minute
Position 2
marble 300-600 mm/minute
granite 200-400 mm/minute
· Maximum Step: Position 1
One step for both marble and for granite
Position 2
marble 0.5 mm
granite 0.5 mm
Recommendations for use
The rotation and feed velocities are approximate and can differ from those indicated based on the material being worked and the profile.
The manufacturer indicates the most suitable parameters based on these two variables at the time of tool delivery.
Abundant internal lubrication is essential for the correct operation of the tools.
It is recommended that the step parameter be respected: the work principle is that the grinding wheel that follows must remove the grooves left by the previous grinding wheel.