diamond wire, diamond segment, diamond saw blade, polishing abrasives, wire saw machine, block cutting machine, drill bit drill rod dth hammer
Stone Factory MachinesStone Block Cutting MachinesCNC Diamond Wire Shaping Machine
$29000-45000
QCNG China
Usage: Granite, Marble, Limestone, Quartzite, Sandstone, Travertine
Parameters | Unit | QCXE-1500 | QCXE-1800 | QCXE-2200 |
---|---|---|---|---|
Diameter of new diamond wire | mm | 7.3~11.0 | 7.3~11.0 | 7.3~11.0 |
Approximative Weight | kg | 7000 | 10500 | 14000 |
Overall widht | mm | 6000 | 6800 | 7000 |
Overall height | mm | 3800 | 4800 | 5200 |
Max. inclination of the wire-driving unit | Gradi Degrees | no | no | no |
Horizontal travel of the wire-driving unit | mm | 2300 | 3500 | 3500 |
Total installed power | kW | 19.38 | 19.38 | 24.03 |
Block length | mm | 2000 | 2000 | 2000 |
Total water requirements | l/min | 50 | 50 | 50 |
Block max. height | mm | 1500 | 1800 | 2100 |
Max. span for horizontal passage between the wire driving pulleys | mm | 3300 | 3600 | 3600 |
Speed of wire lifting/lowering | mm/h | 0-1800 | 0-1800 | 0-1800 |
Overall dimensions (without perimeter fencing) lenght | mm | 7500 | 8800 | 9800 |
Diamond wire length | mm | 18100 | 19300 | 21250 |
Block max. widht | mm | 3200 | 3500 | 3500 |
Block-holding trolley dimensions | mm | 1360x2000 | 1800x2000 | 3000x2000 |
Block max. weight | kg | 20000 | 30000 | 50000 |
Wire-driving unit rotation | Gradi Degrees | no | no | 360° |
Wire peripheral speed | mm/sec | 0-40 | 0-40 | 0-40 |
Block-holding trolley travel | mm | 2300 | 3500 | 3500 |
Min. water pressure required | bar | 25 | 25 | 25 |
Wire actuating motor power | kW | 11 | 11 | 15 |
profiling
slab cutting
Payment required
Payment required
Payment required
Diamond wire
8.5/8.8/10.5/11.0mm
Pulley
rubber belt/ring
Lead Time: 3weeks
Warranty: 12 Months
Install and Guarantee:Customer pay for installation
Maintenance: Online software upgrade, Remote troubleshooting
diamond wire, diamond segment, diamond saw blade, polishing abrasives, wire saw machine, block cutting machine, drill bit drill rod dth hammer