Epoxy AB glue for Natural stone proceesing, Epoxy for slabs repairing, Epoxy for block wrapping, Epoxy for stone composite, Epoxy for stone bonding, Other adhesives
Epoxy AB glue for Natural stone proceesing, Epoxy for slabs repairing, Epoxy for block wrapping, Epoxy for stone composite, Epoxy for stone bonding, Other adhesives
Hair Cracks Repairing Epoxy for Marble
Item No.: 1150
Mix ratio by weight: A:B=3:1
Application: Mainly used for all kinds of slabs (marble, limestone, granite, sandstone) surface micro-cracks, sand holes, chicken feet, ants road, uneven repair.
Crack Filling Epoxy
Item No.: 1150
Mix ratio by weight: A:B=3:1
Application: Mainly used for all kinds of slabs (marble, limestone, granite, sandstone) surface micro-cracks, sand holes, chicken feet, ants road, uneven repair.
[Features/Advantages]
1. low viscosity
2. Perfect penetration to micro-cracks to reinforce the stone structure and increase the gloss of stone slabs.
3. good anti-yellowing;water , oil, weak acid and alkali resistance
4. Transparent glue layer and high hardness and weather resistant.
5. Product reach the standard of GB18583 and ROHS, Environmental friendly
[Scope of Appliation]
Mainly used for all kinds of slabs (marble, limestone, granite, sandstone) surface micro-cracks, sand holes, chicken feet, ants road, uneven repair.
【Technical data】
No. | Project | Technical data | |
1 | Appearance | A component | Colorless transparent liquid |
B component | Colorless transparent liquid | ||
2 | Viscosity(mPa·s) | A component | 600-1000 |
B component | 10-30 | ||
3 | Adjusting ratio(A∶B) | 3∶1 | |
4 | Applicable period(25℃,min) | 60-90 | |
5 | Initial curing time(25℃,h) | 3-4 | |
6 | Tensile shear strength(RT48h,MPa) | ≥8.0 |
[Steps for usage]
1.Slabs should be heated or ventilated to remove moisture;
2. Use a brush to remove dust, scum and other impurities from the surface of the stone;
3. Mix glue in A:B=3:1 (by weight ), and mix completely;
4. Scrape back and forth and apply the glue evenly on the surface of the stone;
5. initial curing in 3-4 hours under 25 °C , and proceed to next procedure after 24 hours
6. Please clean the tools before the glue is uncured.
HUNAN MAGPOW ADHESIVE GROUP CO., LTD
Add: Lansi Road, Changsha Biomedical Base, Liuyang, Changsha, Hunan,
Tel: 0086-731-83285000 Fax: 0086-731-83285126
Mobile/Whatsapp/Wechat: 0086 13973142659
E-mail: asia@magicglue.net Website: www.mpadhesive.com