Power&Flexible Tile Adhesive Black Tile Glue

Performance Characteristics:
Has excellent bond strength and slip resistance.

In low water absorption surface direct bonding ceramic tile, stone

Construction without liquid tile, thin layer construction, convenient use, time saving and convenient.

Has good flexibility, to ensure that the firm bond, the telescopic adhesive layer can with stand temperature impact, avoid tile deformation

Scope:

Indoor or outdoor wall sticking construction, Guanzhu crystal and ceramic tile adhesive suitable for large-scale ceramic tile, natural stone material, especially suitable for high-rise buildings.

For the light steel frame system of the sheet metal such as gypsum board, calcium silicate board, plywood and so on base stickup and indoor ceramic.

Still Can be low water absorption surface paste ceramic tile, such as paste in the old ceramic tile surface tile, as well as in the solid paint surface sticking ceramic tile

Mixing:

The powder into the water mix into a paste, pay attention to first after water put powder. Agitation can use manual or electronic mixer.

Stirring require to fully, without the dough shall prevail, mixing finished must stand for about ten minutes after the slightly stir before use

Surface Treatment:

Paint surface should be a rough-hewn, at least exposed raw surface80%;

Base material with high water absorption or in high temperature, dry conditions, before construction must first wetting basal.

The base surface should be flat, clean, strong, no dust, no water, no grease, dirt and other loose matters.

Construction Technology

With toothed scraper to apply the paste on the face, so that the uniform distribution (adjusting the angle between scraper and working surface to control the mortar thickness ) Each painting is about 1SQM(depends on the weather temperature and the construction temperature range required for 5-40℃), and then in 5-10 Minutes to get title press on(adjustment should be performed in 10 minutes);

Select tooth scraper size should consider the concavity working surface smoothness and the back of the ceramic tile;

As groove gap ceramic tile on the back of the deep or stone, tile larger and heavier, it should be double sided adhesive, namely in the face and back of the ceramic tile also coated with glue.

To be finished:

Brick is completed, must be completely dry after the mortar(about 24 hours) to carry out join operation next;

Wet solid with a damp cloth or sponge before tile surface(and tools) to clean up, If the curing for more than 24 hours, clean stains available stone tile cleaner tile surface(do not use acidic cleaner)

The use of attention:

You must first confirm the verticality and smoothness of the substrates before application.

Avoid y all means is mixed with water and then dried glue.

Pay attention to the retention of expansion joint.

Paving is finished after 24 hours, can enter or caulking

This product is suitable for use in the environment for 5-40℃.

Mortar should be based on weather conditions control in about 2 hours after us(mortar surface crust should be removed)

Packing: 25KGS

Storage: Stored in a cool dry place, sealed products can be stored for one year.